Microphone recommendation for recording 2 channel demos

@yoyoyaya Watch the video in my first post and you'll see what I am trying to do. And that is a real recording of the room you can hear the sound change as he walks around the speaker. No clue mihorn can't hear that.

Ok OP - bit of brain fade there on my part. That you tube video was probably recorded on a phone or on the internal audio of a DSLR/Mirrorless camera - though the jerkiness of the video as he moves around looks more like a phone to me.

If you are planning to record audio shows, I doubt bringing stand alone mics and associated stands and cabling will be practical.

I got a tascam x8 today. It sounds ok when I record my home speaker system but surprisingly not as good as my blue yeti mic in stereo mode.

So now im scrambling to find a better xlr mic (or mics) that I Can plug into the x8 for better audio for the show later today. Its my fault for not doing my research ahead of time.

+1 to @yoyoyaya comments. With just a $500 budget you aren’t going to get any "great" mics, however, as he noted you could get a Zoom H4n Pro or one of the similar new ones for about $200 to $250 with onboard mics and use them. If you bought condenser mics like the Rode NT5 ($429) or M5 ($200) you’d need a microphone preamp to give them phantom power. Microphone preamps can be $$$. I’m not aware of any "cheap" ones but B&H might point you to one. The advantage of the Zoom H4n Pro and similar recorders is they have XLR inputs and onboard "decent" preamps.

For recording concerts and posting them to the Internet Music Archive after doing some postproduction work on the files, I record with a Zoom H4n Pro but use external mics. I have the Rode NT5 stereo pair (which are generally fine) but usually use my nephew’s older but slightly more detailed bass response AKG-391 mics.

If I were younger and had the money, I’d pop for some Schoeps MK4 and a SoundDevices recorder with great onboard preamps.

Note that these Zoom and Tascam and Sony digital recorders can do a lot more functionality than just recording two-channel audio but don’t let that phase you. You won’t need to worry about all that "other stuff". Recording is fairly easy.

I see you got a Tascam X8. I suggest the $200/pair Rode M5 as a low-cost microphone solution that should be fine for your use case.

One "issue" I have with YouTube audio demos (other than it being lossy) is that the posters very rarely (if ever) state how loud they are driving the speakers, so you don’t know if they are played at low volumes (75dB) or are being pushed to higher, more stressful volumes (90dB and above) so it makes gaining any useful knowledge from the demo questionable. Have fun.

@OP +1 to Moonwatcher's post above. The Tascam has 48V phantom power so you can use external condensers with it. However, as above, you will be limited with the quality of the mic pres. Good recommendation on the Schoeps Mk4. If you were going into that territory but wanted to spend less, a pair of AKC C414XLS's are pretty neutral as well - about a third less price wise than the Schoeps. That's with due respect to the fact that I think it would be overkill for the chosen application.