Sunfire Load Invariant Amp Filter Cap Replacements

Hi . There is a a philips serial number (3186DG932T150BPA1)  

I have learned how to read these - Currently working on a quote from mouser.com , but this company is very slow to respond and finicky and I'm not counting on them.

Very interesting point about the caps being made specially for carver. The closest to a 9300 uf capacitor I could find at digikey is a 10000uf  150v but these are not stock items even at this supplier.

Someone posted a video of one of these amps on sale with an accompanying video of the old caps pulled out and replaced. I was hoping he might see my post!

     Here's a thought: Two of something around 4700uF/150V (MUCH easier to find), in parallel, to replace each 9300uF cap.

     Just a slight bump in capacitance, which never hurts, in my experience.

     The tricky part is fitment in the chassis.

     If you can find some small enough, in at least 150V and mount/wire them with their terminals facing each other (save some room?); you'll be golden.

     I just picked 4700uF because Newark has 176 caps, of various voltages/dimensions, in that value.

https://www.newark.com/c/passive-components/capacitors/aluminium-electrolytic-capacitors/snap-in-screw-terminal-aluminium-electrolytic-capacitors/prl/results/2?capacitance=4700uf

     If they don't have something that fits in stock: get the data and search further for someone that does.

     Of course: there are also a plethora of values that can be combined, to match or exceed the 9300uF.

     Actually: staggered and stacked, four 4700uF caps should fit easily.

     Perhaps four of these would fit, that way:

https://www.newark.com/vishay/mal220213472e3/cap-4700uf-250v-alu-elec-screw/dp/60AK9812

Thank you for your help and links on this.  I appreciate it.

       Hope some of that helps!

            Happy listening!