2. analog
  3. 191844-52332

TDM 24CX-4 Stereo 3-way / Quad 2-way questions

I recently purchased a TDM crossover.  Resoldered old connections and replaced the electrolytic capacitors.      The unit doesn't come with a channel link switch & on/off switch on the back as the manual says it should.   Wanting to run it as a stereo 3-way.   Is it possible jumpers would need to be relocated to change from quad 4 way to stereo 3-way?   Recommendations?

Thank you

scott28tms
lewm
12,994 posts
 

What?

scott28tms OP
1 posts
 

To be more specific..... My TDM comes with 4 inputs for quad 4-way operation.  The manual says there is a channel link switch on the back to link channels together and make 2 stereo 3 way channels.   There aren't any exterior channel link switches.    There isn't an on/off switch as well.   I've found a few other units online that appear to be the same as mine.   Any help would be appreciated.

lewm
12,994 posts
 

What do you want to achieve?

lewm
12,994 posts
 

My guess is that you or someone competent to do it is going to have to open the chassis, take a look at the internal wiring, and then modify the connections to suit your desires.  You have not really said what it is you desire, but I am guessing you want it to operate as a 3-way in stereo.  When you say "quad 4-way", a reader might take that to mean there are 16 filters that comprise 4 channels each of which provides for 4-way operation of a single speaker.

More to discover