Transporter vs. Squeezebox Touch w/PS AudioDL-III

Everything I've seen says that the display module used in the SB3/Classic and Transporter is no longer being manufactured.

However, that doesn't necessarily indicate a repair problem since there are probably a fair number in reserve for service purposes. The number needed for service is going to be far lower than needed to continue new manufacture.

Just think - you can buy NOS (new old stock) vacuum tubes that are 40, 50 or more years old without too much problem, though some are very pricey due to rarity now.

If you are thinking Transporter, I wouldn't worry too much about this particular issue. (Of course, I have no connection with Logitech so have no way to know for sure.)

i took the plunge on the touch and ps audio dac III. i am very excited! one question; do i run an optical cable to the dac from the touch then from the touch to the receiver...rca cables? i see on the ps audio dac there is two digital cable inputs. which one would i use? like i said before, i am using a rr2150 receiver.

thanks in advance.

you run a digital cable from the touch digital output to the ps audio digital input. then you run analog/rca cables from the ps audio to your outlaw receiver. you can use either optical or digital coax, whichever you have on hand, but most prefer digital coax. as far as the digital input on the ps audio, i'd say just use the first one.

thanks for the reponse.

there looks to be two digital ouptuts; a square looking one and an orange rca looking one. when i say i am a newbie i wasnt kidding! blue jeans has the folloing options available: http://www.bluejeanscable.com/store/digital-audio/index.htm

i assume the Belden 1694A Coaxial Digital Audio Cable with rca to rca cables is what i want?

thanks again.

That's right. The square output is the optical/toslink. I'm curious to hear what you think of the Touch.