Could Monarchy DIP Combo improve my Logitech Touch

I own the Touch and I just recieved on trial a Monarchy 48/96 upsampler DIP to see if the Touch digital output can be further improved.
I thought about the combo but I cant see what advantage the combo would bring if my Dac can process a 24 bit 96 khz signal.

Not sure if these units need some break in time, but most electronics do, so I will report back in about a week.

Rapogee,

I had the DIP combo inline between the Duet and a Havana DAC and could not tell much of a difference. When I replaced the Duet with the Touch I did a bit of A/B'ing with the DIP combo in then out of the chain and again I could not pick up a difference so I took it out of my system.

By the bye, the improvement from using the Duet receiver to the Touch as a digital transport to my DAC was significant improvement; which was quite surprising. I am interested in what Ozzy finds.

Those days when I had good transports, jitter was always an issue and plugging in the DTI by Audio Alchemy then and even the digital lense by Genesis was incredible.

I was just curious if the Logitech Touch, a digital format with no moving parts but not knowing how good the digital interface is would serve better in eliminating jitter issues and clock speeds of my DAC. I wonder how much demodulation is required or takes place from the incoming signal of my Touch going to my DAC?
I know they exist and would like to know if the Monarchy is necessary or will provide minimal use in the chain. I guess I have to get one and tried it out.

Would the Monarchy DIP Combo improve my Logitech Touch? I am not sure what type of jitter issues would the logitech transfer to my DAC (Chord DAC64)?
Any suggestion?
Rapogee

Rapogee, you might want to spend a little time & understand the (complex) Chord DAC64 before you ask such questions. The Chord DAC64 is a pretty kick-ass DAC even tho' it's not the lates & greatest audiophile widget out there.
Specifically, the DAC64 has the ability to buffer the music for 2 seconds or 4 seconds, which is exactly akin to asynchronous rate change. It uses a pretty deep FIFO (first in, first out) buffer before the digital music is feed into the DAC. It's a built in Monarchy DIP but much better. It looks like you are quite unaware of this handy feature! You need to read the manual & figure out how to turn on this feature.
Once this feature is on, adding an external jitter reduction/elimination box will/should have no effect.

Bombaywalla,

Thanks for responds and agreeing that my DAC is good since it is a pretty kick-ass DAC even compared to the once I have tested, ARC DAC8, Ayre USB Dac and a few others to name. I did contact Chord and discussed about the buffering capabilities and also the clarification about it being an upsampling dac or not and its ability to relock any data coming in at 44.1 and 96khz.
Thanks for the clarification, either way I trust I have to understand this better but with some of the discussion I have been seeing with reclocking and demodulation using different oscillators in the system to provide the correct synchrony between the Transport and Dac has give me some curiosity. I always thought that jitter can not be completely eliminated from the Transports end and that there are always room for improvements. You are probably right since even with the original Spectral DAC I had long ago, the Genesis Lens and all the interface out there did not make much of a difference since the Spectral took care of business as soon as it received its data.

Thanks again
I still should try it out and listen to my self once and laugh about it if I do get a chance to place it in the chain to see for myself.