Emitted is the key word here. Emissions are the same as radiated emissions. Most products are limited by Class B to less than 40bDuV/m, at least those that pass Class B testing. This is low enough so you will not have interference between components. Interference of clocks and SMPS supplies inside a component is certainly possible, but usually affecting only jitter in digital systems, not causing errors. Jitter is affected because signal noise levels are increased. Generally in good designs, the problem is more power supply electrical noise, magnetic fields and ground return paths that are more problematic, not emissions.
The thing to understand is that usually the only components that are even sensitive to radiated emissions are tuners, and these can pick up uV of EM radiation.
In typical audio systems, the component-component problem is ground-loops picking up EMI. Eliminate the ground loops and the problem is gone. If the ground-loop is retuned by making it larger diameter or smaller and maybe by twisting the power cords together to minimize the loop area, this can be a fix. Its usually when the ground loop is a size that acts like an antenna that serious problems occur. The area tunes a specific frequency and its harmonics.
Steve N.
Empirical Audio
