Learning about my room and my sound..


Ok, so I have a Radio Shak SPL and I see all these posts on here about people's speakers and performance, now maybe I am an idiot or overwhelmed but how and where do you start to test the performance and synergy of your speakers in your room? I know there are tons of threads but can it be explained to me please?
All I know is I have a SPL that I use to calibrate, and I have a test disc but it is of high tones, so I assume I need a low frequency test disc and then what please>?

P.S. please be kind I know alot of you may laugh at my question but I really want to know what to do
thanks Chad
chadnliz
Rives is very generous with free advice for the DIY guy, and I would take this attitude into account when hiring professional help. And furthermore, what they say seems to make good technical sense to me.
Larry (Cello), I had the level one service performed by Rives on my room and they were a pleasure to work with. I followed their final recommendations regarding treatments, locations of same, and equipment placement. The equipment placement was a 180 degree change from where it was before we started.

End result: Most effective cost/benefit upgrade I have ever done. Room aesthetic is pleasing, acoustic is wonderful, and my music has never sounded better, not only to my ears but to those ears of some fellow AudiogoNers whose knowledge and hearing I respect.

Rives is highly recommended. Richard Bird is very easy to get a hold of, listens to what you are telling him, and is VERY generous with advice.
Slipknot1 - when it came to acoustical treatments, did you have them recommend particular products or did they supply you information/assembly drawings that you could make or install yourself?

From the photos of your system, I can see a number of wall panels and some corner treatments. Could you provide a little more information on what you did in terms of materials and what Rives supplied?

I'm working on the acoustics in my room and have been doing a lot of reading and playing with some DIY treatments. The Rives site is a great starting point and I may eventually have them take a look at my room as well.
Before you start spending megabucks on all kinds of test equiptment, walk around your room as is, no music playing at all and CLAP very loud, as loud as you can. The area that sound reflects best back to you is an area for treatment. If you have hardwood floors, ask a ladyfriend to walk aroung with heels and listen for the reflections off the shoes. Best Advice, Call Mike Kotchman of eco busters, he will be willing to help you.
Advent11,
Sorry for the delay in response. I have not been posting too much lately. Too many other things going on.
To answer your question. Every treatment, right down to the rug on the floor is there per the "Rives plan". The corner treatments are RPG Variscreens. They are very expensive, but very effective hinged screens that are reversible. One side is diffusion, one side is absorbtion.
The ceiling treatments are from Quest Acoustical Interiors, as are the wall treatments. The fabric covering them is from Guilford Of Maine, acoustically transparent and available in a host of colors. You order the panels from Quest in the color you want and they arrive ready to hang. Both RPG and Quest give Rives clients a discount. Depending on the amount and type of treatment Richard recommends a lot of it can be DIY. Richard will give you lots of great advice if you want to go that route as well.
Rives gave me basic dimensions and materials type for the floor rug and I took it from there. The room had an artificial fiber wall-to-wall with hardwood under it. The plan called for pulling it up and replacing it with a 100% wool area rug. I purchased a Persian carpet through a rug broker. I ordered everything directly from RPG and Quest and installed themself based on placement as laid out in the final room plans from Rives. All the window treatments and the doors were done based on their recommendations as well.