Bearing well oil - NEED ADVISE

any synthetic motor oil will do it does not break down i use it on my simon yorke turntable

Thanks to all who are trying to help me find my way through this dilemma.

Contact the manufacturer !!! Many turntable bearings are designed to operate with high viscosity oils (like 80 weight hypoid gear oil) NOT low viscosity oil. The bearing materials may also be adversely affected by friction modifying additives like sulphur and molybdenum disulfide. Don't take a chance as you could trash the bearing.

For example using low viscosity oil in a Rega will sound awful and potentially ruin the bearing in short order.

It is counterintuitive, but a higher viscosity oil will often (in fact usually) sound better than a low viscosity oil, and will cause a negligible increase in the power required to turn the platter.

At the rotating speeds and temperatures that these bearings are put to, break down of the lubricant and viscosity aren't really concerns as to the life of the bearing. The viscosity, however, will affect the damping of the sound of the bearing. Any oil, even grease, will work to protect the bearing, but they might sound differently, depending on their viscosity.
I second the synthetic oil (5W30) recommendation as a good "forget about it" oil to be used in turntable bearings.
Bob P.