TT/Tonearm/cartridge interaction theory?

Thanks a lot. More material available than I thought. I will have to read thru all and digest.

Dear Nil: In all those links that other people posted you have almost the answer for your questions.

+++++ " What kind of tolerance on this right amount is tolerable without loosing too much of a signal and ... " +++++

The tolerance range ( up/down ) is the one that the manufacturer gives at the cartridge operation manual. Between that range you could " move " but you have to take in count all the others parameters that has relation with the VTF for stay right on target: """ I do some clue that the amount of signal that cartridge retrieves from grooves is miniscule...""""""

The next step and a very critical an important one is that that minuscule signal could be amplified with enough gain and with out distortion/noise/colorations an according to the RIAA eq. and that's means with a RIAA deviation no more than 0.05 db

Regards and enjoy the music.
Raul.

The arm wand material is a consideration also. Steel, aluminum, and carbon fiber tube arm wand may have resonance characteristics of dragging a metal/hollowed tube on a rough surface. Solid or small diameter wooden arm wands have lesser resonace/ringing as metal tube. Wooden arm wand gives more natural music. Metal arm wand that was carefully tuned can provide accurate music. Surprisingly, the musical differences among arm wand materials are in tonality not in frequency ranges. All arm wand meterials extract all frequencies from the record. Different arm materials emphasis different area on the musical frequency spectrum. Wooden wand tends to sound warmer and more relaxed than metal wand.