VPI Scoutmaster - Anti-skate again..


Hi,
I'm sure this has been covered, but I couldn't find it...

As we all know, the coiled wire of the JMW-9 tonearm provides anti-skate force naturally, and is seen by VPI as preferable to any mechanical implementation.

VPI now provides a mechanical anti-skate with the Scoutmaster turntable. It is supplied but not installed. VPI still stands by their original position on anti-skate.

Now, for my experience.

I started without the use of the mechanical anti-skate. Listening, backed up by the Hi-fi+ test LP, convinced me that more anti-skating force was needed. I twisted the lemo connector counter-clockwise to apply more force, but I didn't notice any difference.

I then implemented the mechanical anti-skate. I found by visual inspection and confirmed with the test LP that, even at the lowest setting, far too much anti-skating force was now being applied.

Listening tests with the mechanical anti-skate engaged were a mixed bag. I found the image to be more centered, rather than leaning to the right, but I also noticed a loss of fine detail. For instance, when a fast sequence of plucked guitar notes were played, each note stood out more independently WITHOUT the mechanical anti-skate. With the anti-skate engaged the notes smear together slightly.

Has anyone had a similar experience? I am hoping to find a solution that will enable me to focus the image better and not lose any detail. It seems to me that I need a way to provide a little more anti-skate, but not a lot more. (and I am slightly baffled as to why the lemo twist method seemed to have no effect whatsoever.)

Cheers.

Tom
tfkaudio
Buy or borrow a voltmeter, the Cardas record and the Fremer DVD. All your azimuth questions will be answered in the video for setting up a Scoutmaster. Fremer demonstrates how to set azimuth and it is so slick and simple. I decreased the crosstalk of my Denon 103 from 3dB to 0.5dB and the imaging and soundstage change is amazing.

The set screw of my counterweight is clockwise of center from the front.

Sullygr
FWIW

I received my antiskate device today from Elusivedisc and the metal has been replaced with 2 small o-rings. Apparently, VPI watched the Fremer DVD and fixed the problem.
I'm gonna sue for patent infringement. I posted that very tweak here months ago in considerable detail, though in the context of a different arm.

Harrrummmph!!!