Tracking Force Gauges


I have only coarsely adjusted VTF on my cartridge using a Shure gauge and taking into account the ~ 0.3g overshoot some have reported.

I would like to embark on a careful study of the sensitivity of the sound attributes to small deviations within the recommended mfg's range. I'm curious to know what high VTF sounds like compared to low VTF and to find an optimum setting.

To do this I'm interested in your recommendations on digital VTF gauges with 0.01g accuracy.

I've heard about the MyWeigh scale and others. It seems like the my weigh scale is a traditional looking digital scale in that the measuring platform is very wide with the load cell likley centered beneath the platform. I'm not sure that one gets repeatable and accurate results if the cartridge were to be placed near the edge of the platform if the arm can't be moved in such a way.

Any thoughts on accurate VTF measurements?

Andrew
aoliviero
I have a Winds and am tempted to buy that $95.00 gauge anyway, before they raise their price.

That is a VERY fine looking stylus gauge for less than $100.00, did you notice they offered free shipping as well?
Update:

I just ordered one of these based on the comments here. I will let you know how it measures against my 1/100ths gram Winds after it arrives.

Even if it's not perfect, once the "correct" weight is determined, the user can repeat that perfect setting anytime.

That's the real value of any stylus force gauge, repeatability in very fine increments.
Per comments mentioned above. Agreed, it is proper to measure VTF when the arm height is the same as when the stylus is in the groove.

The Clearaudio Exact gauge does have this coveted ability as the measuring platform is quite thin! As such, placing the the Clearaudio gauge on top of a platter and dialing in exact VTF is a simple task. It is a very functional stylus force gauge.
Well the best one to go for is The Cartridge Man Digital Stylus Force Gauge, accurate to 0.01g and regarded as the best, but it is pricey. However once you have used one you will never use another.
I had the Cartridge Man guage.The problem with it was that it needed to be recharged often.Not a good thing if you suddenly need to check downforce.Also,I was sceptical of the accuracy after about ten minutes of going back and forth to the table.There was, often,a differing readout.Sorry!Maybe mine was out of wack.

As to you,Albert.Though the 95 dollar guage seems to be a really nice unit,I'd be happy to trade you mine,for your Winds. -:)

We have compared this guage to my friend's Winds guage and found a difference of 6/100's difference.Not really a big thing,and who knows for sure which is most accurate.
The nice thing about the 95 dollar guage(btw-Acoustic Sounds sells it for 185 bucks)is that it immediately tares to zero,so checking downforce is really fast.It seems to be quite consistent too.

I do wish it was a little more robust looking though.The Winds looks like a "Mosler Safe",and I like the heavy duty look,and feel.Yet it can be a pain in the tush to "fotz" around with that little zeroing out dial,to achieve that "blinking zero" reading,which must be had for supposed accuracy.
Still,if I already had the Winds I'd never think of another guage again,unless I was the kind of 'phile who had a really complex,tube laden,and (word on the street,from what I've been told)slightly dark sounding system,that lacked a bit of inner detail. -:)Just kidding!!!

Best!