Systemdek IIX and a vpi scout

I have the IIX with the OEM arm. I have tweaked the unit by apply Dynamat to the - plinth, suspension members, motor, motor mount and arm board. The difference can be heard with a stethescope. (I applied a reasonable amount to the suspension parts - didn't want to add too much weight. Additionally I have taken the bottom panel off and removed the foam from the springs and cleaned them and applied talcum to the rubber bushings.
Seems to me the Systemdek IIX is a giant killer. First - the suspension unlike most other units - can be adjusted from above. No need for go from underneath which is very awkward. Additionally it has a heavy glass platter. Most other suspended tables from that error came with metal platters. (Of course all can be changed to acrylic). I use use the Goldring 1012GX (I used to use a Grado - too much hum even with MuMetal applied)
The OEM arm appears to be the same model used in AR turntables like the Legend and EB 101. I too have thought of getting another arm but haven't because I'm not so sure it would be an improvement (when is the last time someone could demo an arm?) However I have heard nothing but good things about the Regas so I'm pretty sure the sound won't degrade and one can be bought used. (I think the mount is different so you will need to make a new arm board or change ithe existing hole if that's possible)

the profile just seems to work better (more balanced) presentation on this table. might be the suspended sub chasis working with the arm is a more synergistic way than with the rega.

I've never owned a VPI, however, presently own a mid 80's vintage Systemdek IIX with original Profile (Made by Jelco) tonearm with the removable headshell, and Sumiko Blue Point Special MC phono cartridge.

After owning a few Rega Planar 2's of various vintages, and a Planar 3, I am convinced that the standard Systemdek IIX is a better table than either of the Regas. I believe that the Profile tonearm is just as good as the RB 250 and almost as good as the RB 300 -- and it also offers the convenience of a removable headshell which makes changing cartridges a breeze.

I agree with one of the earlier posters, in that if you find a Systemdek IIX in good condition and for a reasonable price -- $200 - $500 on Ebay depending on cartridge and tonearm (or at the lower end minus both) that this table is a "no brainer."

It sounds fantastic, is easy to setup and maintain and has an understated elegance to it which is makes it attractive.

Moreover, like the Linn LP-12, the Systemdek IIX offers a sense of PRT (pace rythym and timing) which is quite good,
and helps to keep the listener involved in the music.

Next to my Sony Prowalkman WMD-6C and Linn Classik K, the Systemdek is the best money I have ever invested in hi-fi; a component that in spite of its modest price, faithfully honors the music.