Is there a 3g. anti-skate weight for Graham arms?

Firstly,Bob Graham knows his products,so please don't waste your listening time with this.
Secondly,as to the "professional setup" having the antiskate all the way up the collar,for least force,I'd assume they were NOT professionals,or were compensating for problems elsewhere,in the system.Possibly the cartridge had ZERO weight(just sarcasm,sorry).

It's easy to actually check for accurate antiskate,and the Grahams can be had with a device for this.However if you follow the instructions with the arm,you should be close enough not to waste your mental energy,or time.There are,also,a myriad of test discs that allow for antiskate checking.Hunt one down,or better yet,borrow from a friend.

Best!

Sirspeedy,
Unfortunately the Graham installation instructions that come with the 2.1/2.2 do not describe how to set the antiskate. It does say that each detent on the calibrated shaft is equal to 1/2 gram, and it is clear from the design that placing the weight at the collar does not result in zero antiskate. What is the device you referred to for the Graham?

Sorry!There is no tool from Graham regarding antiskate.But,having set up Grahams,from the 1.5/2.0 to 2.2's(alot) I can state with confidence that you can dismiss any doubts as to the antiskate accuracy of these arms,relating to Graham's instructions,and how they perform in real world conditions.Unless you want to go nuts,and dismantle common sense,in order to find miniscule geometric and technical flaws,which will have no real impact on what you are hearing.Some posters like to do this.I hope you do not.You would be better served listening to your records.

Best!

Please re-read my post. I said nothing about any antiskate inaccuracy of a Graham. My point was that placing the weight at the collar still results in some finite antiskate (by design), and that may have been appropriate for the TT setup done by this professional.

You could benefit from some additional care in your responses. In 2 short posts, you managed to unfairly criticize a known professional, state a tool existed and then retract it, suggest out of the blue that I need a test record (incidentally, I have 2), and suggest I am spending too much time obsessing with TT setup, when I didn't even bring it up, and don't need any help.

Were you having a bad day?

Zargon,firstly I really think you are getting way to carried away in your response to me.I made a general statement about some supposed "professionals" (not alluding to anyone in particular).I've read many posts from owners,and experienced folks who did not fully understand the Graham 2.2.
The measuring device for antiskate,that I mentioned was a simple oversight which I corrected in a followup post.
The business about test records was just some information that I thought some could benefit from knowing about,if not already.I was not alluding specifically to you,so please don't be so self centered!Other folks read this stuff!!

Nothing I posted was specifically directed at you,because from the time I've been corresponding on these forums there has been a wealth of misinformation regarding the Graham arms,by some.
I was simply trying to be helpful,but in all honesty,from your sarcastic tone,I won't make any comments to you again.

As to the antiskate being set at the collar,if your "professional" friend set it that way,FINE!Of course I assume the cartridge was supposed to track at around one gram.Right?