2. analog
  3. 1157059532

Building high-end 'tables cheap at Home Despot II

“For those who want the moon but can't afford it or those who can afford it but like to have fun and work with their hands, I'm willing to give out a recipe for a true high-end 'table which is easy to do, and fun to make as sky's the limit on design/creativity! The cost of materials, including 'table, is roughly $200 (depending, more or less), and add to that a Rega tonearm. The results are astonishing. I'll even tell/show you how to make chipboard look like marble and fool and impress all your friends. If there's interest I'll get on with this project, if not, I'll just continue making them in my basement. The next one I make will have a Corian top and have a zebra stripe pattern! Fun! Any takers?”

The Lead in “Da Thread” as posted by Johnnantais - 2-01-04

Let the saga continue. Sail on, oh ships of Lenco!
mario_b
reinderspeter
22 posts
 
Jean, great writing and all too true.
As I am putting more miles on my PTPL (Peter's Top Plate Lenco) it continues to amaze, it really is very good!
So far everything that wasn't already great has turned out to be an artefact of something else, not of the PTPL. I have finally ordered a DL103 that I will try as soon as it arrives.
Keep up the good work!
Peter
lewm
13,208 posts
 
I had my first listen to a mighty Lenco on Saturday, playing my own records on a system that is otherwise foreign to me. I was floored by the HUGE soundstage, fabulous sense of depth and pace, and yes bass response in spades. Rumble? What rumble? As Jean knows, I am putting my money where my mouth is by ordering a table. So now that I am about to join this exclusive club, can I ask if any owners of Lencos out of Jean's shop are using low output moving coil cartridges on their tables? If so, what are the results compared to the same or similar cartridges used on high quality belt-drive tables? Thanks.
peter_w
13 posts
 
G'day Folks
I don't get this rumble business. Even when I played my totally unmodified L78 after it lay in the garage collecting dust for years and with no oil in the bearing the rumble was not that bad, far less objectionable than the earth loop hum I was getting.
A liberal drop of Mobil 1 full synthetic (the motorbike version) and the rumble was banished never to return.
I mostly listen at very low levels where any background noise is going to be emphasised but I get - nothing. Just a silken, quite gorgeous quiet.
For those interested the rather protracted saga of the Lenco MultiArm Plinth has had its final posting in the All Out Assault forum. Doesn't seem like that much work now that it's finished! Not that I'll be hurrying to do another one - there's some bloody big backloaded horns to build to bring out the most from the mighty Lenco.
Here we go again.
frankhertz
6 posts
 
Lewn, I am using a LOMC, a Denon DL304 with an stated ouput of 0.18 mv on my L78. It feeds into an Denon SUT and I hear no rumble. My plinth is a layered one but not super heavy. I have not direct coupled but have damped the metal. I have greased the bottom and lightly oiled the sides of the bearing but have not touched the motor. Extraneous bits of metal and plastic have been removed from the workings and the springs have been replaced with elastics. One day I may get to the remaining tweaks. Or maybe not. I am really enjoying the music I get from my system now.
Harry
etch
10 posts
 
Lewm,

You should get terrific results from a low output MC, I've used them exclusively on my Lenco and I highly recommend them, especially the 103. The step-up is important and for that you should try to find some beyer dynamic trasformers (Jensen) they are the prefect ratio for the 103 and it makes for an amzing step up. Do a google on mic transformers as step ups to read up on it, in fact, here is the JE Labs page :

http://members.myactv.net/~je2a3/mic-mcstep-up.htm
More to discover