Great bass from a linear tracking arm?


Is great bass and full, rich, mid-bass/upper-bass 'presence' possible from a linear tracking arm?

Is one brand better than the others in this regard:
Airtangent, Kuzma, Walker, ET, Cartridgeman, Forsell, Rockport, etc.?

Is it all just a matter of cartridge selection?
I'm told that an ultra-light cartridge in combination with a light linear tracking arm will produce the best bass.
exlibris
Dear Paul: That will be gimball or similar not unipivot. The design/build of a tonearm is far from be an easy task " there are a lot of black magic " there.

We are on the research on bearings, materials, geometry, resonance, vibration, balanced system, etc, etc. . In the next 2-3 months we will have our 2-3 first different prototypes that we have to test against other tonearms and with any cartridge we have at hand. These kind of work will be a very long time consuming before we will really sure where to go.

+++++ " (the best in your words) " +++++, like our Essential 3150 Phonolinepreamp design our target is that. We don't attemp to design/build something " only a little better ", our approach is the best one and the best one for all audio people. We don't know if we can achieve our very high targets about but we will try hard to meet those targets. We hope that God give us the strenght to be there to really help at the music/sound reproduction.
Like in the Essential 3150, we are designing with out any commercial or other kind of compromise, like always our compromise is the: MUSIC, nothing less.

Regards and enjoy the music.
Raul.
After getting my ET2 arm dialed in on my VPI HW19 Mk3, with a little help from Bruce Thigpen (a benefit from living in Tallahassee),I find that the ET2 is delivering excellent bass response, and that's using a well broken-in AT-OC9, which is not at all a light cartridge at 7.8 grams. Also, I might add that the bass is much better now, as well as the overall presnetation, than with the same cartridge in my Linn Ittok arm/LP12 table.

If you have any doubts on what works and doesn't on air-bearing linear-tracking arms, send Bruce an email and I'm sure he can help you out. After all, he invented it and cousults to those who build them.
Rauliruegas,
I've enjoyed reading your informed posts on cartridges.
Perhaps you would like to chime in on this thread:
Best Cartridge for Kuzma Airline

Here is some information about the Kuzma AIR LINE:

Recommended cartridge compliance: Below 25 cu
Optimal cartridge weight: <9gm.

Effective length: 184 mm
Effective mass: 13 gr vertical
Minimum clearance below platter: 30 mm
Mass: 2 Kg
Exlibris,

"Optimal cartridge weight: <9gm."

Where did you get this spec? It's not listed with the others on the Kuzma site. I'm also interested in this arm as well as the OL Enterprise.
--JP