VPI table owners, help please.

"Cardas says the cables are pretty much the same whether phono or regular. Just set up to use with DIN connector and I should just use the normal rca/rca cables. "
I guess one could say that all cables are pretty much the same." In fact is not that the current debate. Some say zip cord is "pretty much the same" as all.
Don't take my word for it . Give it a try. Include on your list a well made silver phono cable. You'll be glad you did.

Gregadd, I have several "normal" and phono cables setup for audition. Dont assume me to be in the camp of people that think cables are all the same. If I was I would not be on this hunt. First three are going to be the VPI and Zu Xaus phono cables and Nordost Heimdall (regular rca-rca cable). I also have here an extra pr. of Audioquest Panthers and some nice homemade solid silvers that a friend brought by. Hopefully one of these will be all I need.

Any one else have a problem with active ICs? I have a pair of Looking Glass active that cause a low level hum in my speakers when the active sheilding is plugged in. Happens only when I use the cable between Scoutmaster and phono pre, or phono pre to preamp. Other active cables in my system are not a problem.

I had a hum in my system occur when I placed the tube integrated amp in the same rack that the VPI was in.No hum when the amp was on the floor between the speakers.Problem was solved by running a thin wire from the ground tap on the table to a screw on a wall ac receptacle.

I have decided after several cables from tonearm to phono that the Zu Xaus is the one for me. Better than running any of my Audioquest or Bogdans or the VPI tonearm cable. It combined with the balanced Panthers everywhere else is right where I like it. It is the one cable that really didnt bring anykind of attention to itself. Best part is I got it off ebay auction for 160.00 shipped. It was less than any other cable I have tried. Thank you everybody for your help.