RE: set up tips for Cello Reference mc cartridge


Hello, rather and start to play around I thought I would ask here first if anyone has any experience with setting up a Cello reference cartridge? I thought maybe there are a few tips you could pass my way that might save me some grief? Its NOS and as you may know designed by the founder of Mayiba! It is very similiar in appearance to the old mono Mc cartridges that dont have a cantilever!Please any help would be totally charished and appreciated beyond words! That may sound corny? but if you have this cartridge or have seen one you can understand my wanting to be causious before attempting to mount it! Thanks Daren
fihihifi
Thanks Nsgarch and Drjoe! for your responses I was beginning to think that there isn't anybody out there that has heard of this reference cartridge. I can mount just about any moving coil but with the reference Cello not having a cantilever it kind of puzzles me! As its hard to even see aproximately where the stylus is when using a setup tool. I have a Spectral DMC10 Gamma that will be the pre-amp for it the gain should be OK? as I also use a Spectral MCR signature at the moment.This cartridge is suppose to be magic when its dialed in. I appreciate your replies and thanks again, Cheers Daren
Well, the MCR looks to have the same low output as the Cello, so if the MCR works OK w/ the DMC 10 . . . . . . . .

As for the cantilever-less Cello cartridge, the only cartridges in the world I know of that didn't/doesn't have a cantilever are some of the Deccas and the Ikeda. Otherwise, I'm not aware of any old mono MC cartridges (Ortophons?) that don't have a cantilever -- maybe you're thinking of the old piezo-crystal cartridges.

The Miyabi seems the more likely kin, only it has a cantilever. I hope I'm wrong, but did you check to see if there's a stylus?
.
WELL one thing I Know for sure is this cartridge was designed and hand built by the founder of Miyaba I could have his name wrong without my notes in front of me but he name was Tenaca san or something like that? This cartridge is cantileverless and maybe designed after a decca? I read that the designer was a real lover of some of the early mono cartridges! The lack of cantilever is the problem as it is very hard to see where the actual needle or diamond touchs the surface as it is very small and closer to the middle then the front of the cartridge body! having never mounted a decca type cartridge I am unfamiliar with how to approach set up! The body also slides off so you can run it nude. I will have to double check the speelling of the Japanese man who is the founder of Miyabi but its the same guy as he also designed the Mark Levinson cartridge as well as the Cello line. Thanks again for your help! There doesn't seem to be a wealth of info out there! I emailed Mark Levinson but have yet to get a reply. Cheers Daren
Daren, you might find this Miyabi article interesting:

http://www.sakurasystems.com/reviews/reviews11.html

And these Ikeda pages:

http://www.absolute-sounds.de/extremephono/ikeda.htm

http://www.absolute-sounds.de/extremephono/ikeda2.htm
.