New Maplenoll Ariadne owner needing advice

Threaders:

Over the years I have aquired recommendations for pump maintance which I summarize :

1. Those who understand our air pumps emphasize that having oil in the Maplenoll Super Quiet Pump is essental. The Manual calls for Mobil 1 synthetic (SAE 5-30) as the perfered lubricant.

2. The pump should be no more than 3/4 full of lubricant. Apparently, the lubricant evaporates with usage and must be checked every 180 days (6 mon.) to assure the pump will properly operate. Never over-fill. Over-filling may cause pump failure.

3. The two small air plenums and any other plenums you have should be vacated of water when servicing the pump. The reason is that the water from the two small internal plenums can back-up into the pump causing failure of the unit. Clear the others to keep water vapor from becomming a problem.

4. Change the intake filter on the pump yearly. I use a automoblie gas filter -- Works like a charm.

For further details , please request a copy of the Signature Ariadne Manual developed by Mr. leventhal, as posted earlier in the thread.

Thanks for the info Crem1

I wonder if the DR-500 has an air conditioner, or Filter with a oil/water separator.

What is the discerning factor that one has the "Super Quiet" pump (SQP). Other then then the obvious, of it being quieter, what are the visual cues that one has a super quiet pump? I believe that the SQP was an option.

What are individuals using as the replacment for the lubrication of the top air bearing? ( the grease substance that originally came in a syringe) As well as the replacement for the viscous oil in the trough?

What about replacment belts?

Below are the specs from the website on the DR 500:

Super Silent compressors are virtually "noiseless" and are totally automatic. Each unit includes a tank and line pressure gauge, line pressure regulator, moisture trap-filter-gauge, safety-valve, air intake filter and a carrying handle.

1/2 HP
1 1/2 Gallon Tank
2.0 CFM Free Air - 50% Duty Cycle
40 dB/a
114 PSI Op-Pressure
Voltage: 110 V-60
Shipping Weight: 53 lbs

The SQP came with an oak box with a brass screen on the top. The oil for the trough is common motor oil; not sure about the grease for the platter bearing.

The belt size depends on whether you have the older style with the belt going around the subplatter or the later style with it going around the platter itself. Simply measuring it and ordering the closest thing you can find on the internet is what I have done for customers who have required a replacement. As I have removed the motor from the plinth I have gone to dental floss. Pierre at Mapleshade recommends silk thread. Lloyd Walker uses silk ribbon. Thom Makris uses video tape if I'm not mistaken.

Opus100:

Thank you for the reply. The questions you pose should most likely be answered by Ernesto , would you consider contacting them and post the results ?

Opus: Do you own a airbearing TT and if so what model. Please share your experiences with the TT and air pump to enhanse the information on the thread.

Opus100 :

Regarding the upper platter bearing grease , a subtitute that appears to similar is the Merril " Black Bearing Oil" sold on the Vinyl Nirvan Web site for $15.00 US a pop. Different , but with plenty of the black stuff.

I mix a dab of teflon firearm lube inside the bearing itself with existing black oil lodged in the top of the bearing interior w/ a tooth pick as a mixer.