New Maplenoll Ariadne owner needing advice


I have recently purchased a maplenoll ariadne. I have tried to learn a little about the table but find very little information. I know the table was discontinued in the 90's but the little i have found indicated it is a very good table. I am interested to learn if there are any tricks or problems to optimizing this table. As most of you probably know, it is an air bearing platter and tonearm. I plan on putting my zxy airy 3 on the arm once I get it set up.
oilmanmojo
Oilman: Sorry for the late response. Lots to mention but due to the medical detour no changes yet on the 'Noll front. As timing would have it, I also aquired a LP collection ( 1960's rock LPs) - So far I have 200, several hundred supposely on the way ; many UK and German pressings @ 1967, significant J. Hendricks ,those are all mint - US pressings. Lots of gatefolds and alternate covers. But No Beatles. Oil, call anytime for a chat on steaming or anything I can assist you with.

Today, I'm attending a "East Coast Audiophile Society " gathering. Many audio designers and friends are coming several fresh from the CES. Frank Schroder, the tonearm designer, is scheduled to be in the group as is Peter of Soundsmith and Pierre Spray of 'ol Maplenoll fame along with others.

Should the moment present itself , I'll smooze over your arm which appears to me to be a impressive step forward.

Chat Soon, Charlie
I have added two recent pics on my system pics showing the trial oil dampening system. The oil trough is the stock trough that I mounted directly under the air bearing spindle. I attached a pin to the arm clamp and it protrudes down into the oil trough. I am using a fixed level at this time in lieu of an adjustable level in the oil trough. The oil is a heavy weigh lubricating oil with a high viscosity. I have experimented with various levels and viscosities to optimize the dampening for most circumstances. The final touch will be an adjustable level to compliment the tapered pin thus creating the ability to adjust dampening on the fly.
The results are subtle. I did find the stock paddle was too much dampening and tended to kill out the highs (particularly the delicate highs like crystal bells etc.) The dampening tends to help with running a little lower vtf. Following the thread on the universe cartridge, i currently have the cartridge vtf set at 1.68 grams and it is sounding great. VTA is near level with the tail just slightly up on the cartridge. Thanks again for the inspiration from various contributors to this forum.
Olimanmojo : Impressive and innovating ; you win the "brass ring" . Great work
charlie
thanks for the kind words. its guys like you who help the novices like me get the encouragement to try new things.
Oilman, You have developed perhaps one of the most remarkable and cost-effective turnarms that duplicates what has not been obtainable for we lessor audiophiles. Thank You for opening the door...