2. analog
  3. 1183295383

Keith Monks RCM MkII - Help Requested From Owners

Question to KMAL RCM MkII Owners:

In my manual, it shows the Record Cleaning Fluid container (the center one) having TWO (2) tubes leading out of it. One obviously leads to the applicator (actually, the hand pump, from which it leads to the applicator/brush). Where does the other one lead?

Actually, one picture in the Parts List seems to show only one tube coming out of that bottle but it could just be the way the photo is taken.

I just bought one secondhand. I have a second hole in the lid but no second tube and that pair of tubes is not referenced either in the parts list or the manual. I am wondering where the tube leads...

Thanks in advance,
t_bone
t_bone OP
1,182 posts
 
Vtl,
Sorry for the delay in getting back. I am not sure how well the thread motor works. If not tight, it tends to wrap itself partway around the nozzle. When I tightened it, it was fine.

The vacuum pump is nice and quiet. The TT is surprisingly fast. I have started with a homebrew solution and it worked reasonably well on the first record tried (the dirtiest one I have) but not perfectly. I will have to experiment.

The one thing I notice is that while I am impressed by the vacuum implementation on this machine (and the Loricrafts) which both reduces noise and produces considerable suction, I am somewhat underwhelmed by the overall process. I expect that this could be done even better quite easily.
rich121's avatar
Ag insider logo xs@2x
rich121
187 posts
 
"could be done even better quite easily"?
I'm very curious?

Rick
t_bone OP
1,182 posts
 
Rick,
I admit to not knowing EXACTLY how it "could be done better quite easily" (because I have not built (or had it built) yet, but I have an inkling of an idea, which I am not ready to share yet. The KMRCM works well, but it is quite 'inelegant' compared to the playback technology, and I remain struck by the "roughness" of the process. I think that part can be improved, with improvements on both automation and customization of the process.

When I get some free time, or a better idea of how to ask someone else to implement it in a cost-effective way, I will have a crack at it. Busy a all get-out right now.
More to discover