Outlet shoot out

Hey Tom, gots too much thump in the FIMs? That is the problem I hear with most all the outlets out there where the thump and the squawk don't match up.....Guess that is why I like the ACMEs as much as I do....Enjoy...

Mike, I use the same dedicated room for my main HT and 2 channel listening. I have a front projector, and remove the screen and center channel out of the way when listening to two channel. The single ended inputs on my Classe Omicron are connected to my HT processor, and the balanced to a SF Line 3 preamp for two channel. I simply switch the selector on the Omicron to choose one or the other. All my gear is recessed into a 2x8 bump out with the outlets lined up behind the racks. It was fairly easy to unplug (all or some) my two channel components and plug them into the ACMEs for comparison. Each outlet has its own 20 amp breaker wired with 10 ga Romex. My main speakers are Thiel CS7.2s.

Hope that helps clarify how I was able to make such a direct comparison between the FIM and ACME.

Bob, I may be in denial on this one and wishing for something that won't happen. We'll see. I mentioned the ACME's superior coherent blend of lows/mids/highs since this is important to me as well, and the one area I find the FIM falls short. You're right, the bass is the culprit. As good as it is alone, it can sound disconnected and disproportionately large.

Tom, thanks for the explaination; makes perfect sense.

Tom, it isn't just the FIMs that lack coherency....Levitons are the worst about this followed by slot attachment P&S followed by the Hubbells...Don't know where the FIMs fit in here as haven't played with them.....Most folks won't hear it that way, but again my suggestion is to go with whatever works as all these outlets are cheap and easy solutions....