Halcro,
I have compared the arms but in a limited manner. The Schroder SQ I have as an effective mass of 18 -22 gm depending on the mounting plate I use. This greatly affects its performance. Obviously a low compliance design won't sound as good. But an 10 cu design does amazing. This includes the PC-1. The SQ somehow frees the cartridge in a way that you feel you hear the cartridge in terms of music with no mechanics at all. Put a Koetsu on a SQ and the holography is unreal, in the best of ways. But,, it might not be for all. Put my ZYX Universe on it and you really have detail and 3 dimensionality with that shared sense of space (SSS) so well explained by others. But,, in the Ikeda the Universe has better dynamics and an improvement in bass & highs. Yet it misses the SSS that the SQ allows. But my Univese is about a 6.5 cu so the Ikeda will be better match in some ways. The Universe can have different compliance ratings (they are all over the place) which will determie what arm is best. The Phantom is somewhere between the SQ & Ikeda. It is a much lower effective mass, w. incredible dynamic agility but less high end air than the SQ. But again it needs the right cartridge. A Lyra Titan I is probably the best cartridge for this arm. You can easily tune the sound by adding/removing damping fluid. You can adjust the magentic gap on the SQ to the same end. Ease of use & setup is almost exclusive to the Phantom. Nothing comes close. The SQ is very difficult to setup until you learn it and it can be a nightmare as it doesn't have a lock to stop the arm from flinging across the table. Imagine losing a $5K plus cartridge due to a tap on the arm. That is why my SQ is in the back. Also, I constantly need to adjust the magnetic gap as it changes daily. It takes me 30 seconds to do. But, once the SQ is locked in, IMO nothing comes close to bringing me into the music. OTOH, if I want kick ass dynamics, the Phantom it is. The SQ is a single cable from cartridge to phono stage and the Phantom has a few joints. There are a lot of variables.
You have me interested in the Continuum arms. I would love to compare it one day.
Just to let you know, it is almost impossible to compare any arms w. identical cartridges and be fair. Every arm has its ideal set of matching cartridges. And then there is the phono stage matching the cartridge. Esp, if there is a SUT. I would say how does the best Phantom combination compare to the best SQ combination that I have heard. And that is what I just described.
I have compared the arms but in a limited manner. The Schroder SQ I have as an effective mass of 18 -22 gm depending on the mounting plate I use. This greatly affects its performance. Obviously a low compliance design won't sound as good. But an 10 cu design does amazing. This includes the PC-1. The SQ somehow frees the cartridge in a way that you feel you hear the cartridge in terms of music with no mechanics at all. Put a Koetsu on a SQ and the holography is unreal, in the best of ways. But,, it might not be for all. Put my ZYX Universe on it and you really have detail and 3 dimensionality with that shared sense of space (SSS) so well explained by others. But,, in the Ikeda the Universe has better dynamics and an improvement in bass & highs. Yet it misses the SSS that the SQ allows. But my Univese is about a 6.5 cu so the Ikeda will be better match in some ways. The Universe can have different compliance ratings (they are all over the place) which will determie what arm is best. The Phantom is somewhere between the SQ & Ikeda. It is a much lower effective mass, w. incredible dynamic agility but less high end air than the SQ. But again it needs the right cartridge. A Lyra Titan I is probably the best cartridge for this arm. You can easily tune the sound by adding/removing damping fluid. You can adjust the magentic gap on the SQ to the same end. Ease of use & setup is almost exclusive to the Phantom. Nothing comes close. The SQ is very difficult to setup until you learn it and it can be a nightmare as it doesn't have a lock to stop the arm from flinging across the table. Imagine losing a $5K plus cartridge due to a tap on the arm. That is why my SQ is in the back. Also, I constantly need to adjust the magnetic gap as it changes daily. It takes me 30 seconds to do. But, once the SQ is locked in, IMO nothing comes close to bringing me into the music. OTOH, if I want kick ass dynamics, the Phantom it is. The SQ is a single cable from cartridge to phono stage and the Phantom has a few joints. There are a lot of variables.
You have me interested in the Continuum arms. I would love to compare it one day.
Just to let you know, it is almost impossible to compare any arms w. identical cartridges and be fair. Every arm has its ideal set of matching cartridges. And then there is the phono stage matching the cartridge. Esp, if there is a SUT. I would say how does the best Phantom combination compare to the best SQ combination that I have heard. And that is what I just described.