First used turntable +- $20,000. Any suggestions?

make sure you keep a dollar or two for a record, just in case you want to start buying them.

All,

Thanks for the feedback. Nice to see such a lively thread. I agree with some of the people it might be better to start off with a cheaper table to get into vinyl.

I do need to do a lot of research about turntable and yes I also believe that currently I should go for a turntable that doesn't require that much tweaking.

What do you think about the following turntables (yes some of them are quite expensive I think)

- VPI HRX
- Brinkman Balance
- SME 20/2

Thanks

Nrostov,

Although not the simplest choice, I don't know what you mean about needing "to make adjustments to it regularly."

Maxx,

There are certainly many good choices and no one answer; a very personal thing with many factors, not all of which have to do with sound.

You may want to add Kuzma, Basis, Galibier and TW Acoustic, among others, to your list.

Yes, you do need to make adjustments, Piedpiper, if you have the discerning ear and clever enough hands for it. Depending on the thickness of the LP, you may even want to change the VTA everytime to make the music sound just right and to get a full soundstage. I have modified my tonearm just for that and that I can do it from my listening position without having to lift the needle from the record.

Detlof,

the benefits of fine VTA adjustment don't vary with the table except to say that they will show up more on higher resolution systems. My former point was that whereas there are a number of adjustments that can be made, once the Walker is set up properly, it will hold its adjustment and needn't be constantly maintained, unless the floor it is situated on is unstable, in which case the horizontal balance can should be checked and adjusted for with the simple turn of a dial.

Have you implemented a motorized VTA adjuster? I bet that is gratifying.