Flattening a warped LP

1/8" plate glass will be fine, not tempered, unnecessary. Don't worry about temp, you are only bringing it to approx. 200 degrees.

one other note; you want a gradual increase in heat for both the Lp and the glass....so don't pre-heat the glass very much....just make sure it's not real cold.

I have had success using a hair dryer as a heat source instead of the oven.

C

I have the new japanese market replacement for the air tight LP flattener.
I guess you don't live in Australia, otherwise I would flatten one for a beer :--)

or you could always buy one - they are very kool

Just found an LP that sounds great(David Bowie-David Live mastered at Sterling by Robert Ludwig)but unfortunately is rippled with warps making the dynaflex nearly unplayable even with the VPI peripheral ring and center clamps. I decided I can't subject my stylus to this violent roller coaster ride and so am trying a variation on the Mikelavigne technique outlined above. I wasn't sure about the glass so I covered two pizza stones with aluminum foil(smoothly). I have preheated these to 180 degrees in the oven and will sandwich the LP until cool. Hopefully the weight of the stones and mild heat will solve the warping and the aluminum won't damage the vinyl. I have no idea how this will turn out but this was a lost cause anyway. I will post my results. Meanwhile, any comments? Will I need to reclean the LP now? Is warm aluminum toxic to vinyl somehow?