artemis lab, phono preamp?

I have the Artemis Labs Ph-1 phono stage and absolutely love it. It gives you about 52db of gain without the use of step up transformers which I think is great. I use a Benz wood bodied cartridge that has .9mv output and it is a great match. This phono stage has wonderful harmonic structures, wonderful micro and macro dynamics, and is very even balanced sounding across the entire frequency range. Not one area is highlighted. It produces music very naturally in a live acoustic event sense, not hi-fi in your face at all. I say this because I listen to live jazz, blues and symphonies 3-4 times a week on a regular basis, so I feel I have a handle on this. Another thing that I love is that you have an infinite number of variability for load adjustments by simply inserting whatever value load resistor you want into the back side of the unit. Build quality seems to be excellent as well. I have not heard the Pl-1 at all so I cannot comment. I went with the Ph-1 because it works excellent with my cartridge. If I decide to use lower output cartridges I can always add outboard stepups to match that particular cartridge. I absolutely love this phono stage and do not at all consider it overprice. If you have an opportunity to hear it, I think you'd love it.

Best regards,
Don

 
You mention the Audio Research PH7 - if you can spring for that phono stage I don't think you'll second guess your choice. It is one of the best, and quietest tube phonos available today.

Closer to the cost of the Artemis Labs, consider the ZYX Artisan.
 
Tim
 
 

Can anyone comment on the noise level of the Artemis PL-1? Is it a very noisy phonostage?

Can anyone comment on the noise level of the Artemis PL-1? Is it a very noisy phonostage?

Swap out a few different 6N1P's (the input tube). This is almost always the problem.

The good news is that they're inexpensive and you need only one of them. The bad news is that you'll find some that are quieter than others.

The Artemis phono stages are not the quietest ones on the block, and this bothers some individuals more than others. In a perfect world, all components are dead silent. Given a less than perfect world, I listen for how a component conveys the musical intent of the performer above all other criteria.

My advice (as a former Artemis dealer) to those choosing between the PH-1 (52 dB gain) and the PL-1 (72 db) is to go with the PH-1. The PH-1 gives you the flexibility to match the step-up transformer to the cartridge. While the internal step-up in the PL-1 is very good, no single step-up transformer is ideal for all cartridges.

There's a misconception by some that the PL-1 is a different design. It is merely a PH-1 with an internal MC step-up transformer.

I reserved my recommendation of the PL-1 to those who absolutely hated having an extra component on their equipment shelf. With the narrow footprint of the PH-1/PL-1, this is not the issue it is with full width components.

Yes, there's a disadvantage in having an extra connection - assuming you limit it to one extra connection, by having a hard-wired output which saves you one connection). The return is flexibility to match components.

Cheers,
Thom @ Galibier

Thanks Thom for your comments. Is there any particular 6N1P that you would recommend?