SP10 Mk II vs Mk III

Nice! Did you make the plinth?
I've seen repro SP10 platter screws for sale in sets of 3 on eBay, but not in recent weeks. Check it out, anyway. Maybe Albert has a better lead. Failing that, you can probably fashion some using the proper metric screws plus a piece of tubing or metal stand-off to create the sleeve over the threads. Check McMaster-Carr for odd metric stuff.

When you say your SP10 is "very good", what are you comparing it to? I see an RS-A1 sitting on something over to the left.

Thanks, I will get some McGyvered Screws made up this weekend. I had the SP10 Plinth made for me , it is a "standard" Russian Birch Ply/MDF type.
I am Comparing this SP10 creation to The RS Labs Arm on an older plinth I had made for a Lenco L75, to the right of this SP10, I have a 301 with 3012 MKII arm in a Simple Plinth (Its a layered Ply/MDF also)
I like all three of these Turntables and have had them in one plinth or another for many years. The L75 is in it's 4th plinth, the 301 is plinth version II and the SP10 is in Version 3, My system pics show version 2 of the SP10 with racing stripe - Yikes!! It's first version was the Original McCurdy Plinth with about 300 lbs mass and a Rega tonearm. While using that SP10 I found I really liked/preferred the big DD tables versus some of the other turntables I had used (Sota Sapphire/Vacuum/SME IV and VPI TNT Jr , Linn and a few other Belt drives ) Then Came the Lenco Challenge that offered me a view of the Idler wheel phenom., and the 301s came last after one very fortuitous Summer were I found one for $25 and two weeks later found one in the trash! Really!
I find the Garrard 301 to the most beautiful Vintage turntable. This latest SP10 Plinth came about because of the FR64S arm that I found this summer (Garage sale too, but I had to pay Non Garage sale price for it...) I wanted to do my best Plinth yet and really give the SP10/FR64 the platform it deserved. So I had this plinth built with strict instructions to keep the look Simple and wanted close 100 lbs mass. Early listening to this SP10 prove that it will be World Class in Performance but the cost has been VERY Reasonable, I cant imagine equaling this TT with a Modern purchase for anywhere near the same money.

Dear Lewm: Something about the Sp-10 plinth: in the last 10 months I heard at least seven Sp-10s ( MK2/3 ) in different systems and with different plinths with different kind of performances I heard all them with good quality but in no one system heard a SP-10 that performs better that mine ( due to the plinth ) that is almost with no plinth at all.

Mine is not very good looking but is a winner, if like me you are looking for quality performance IMHO maybe you should try with and with out plinth before decide which path to go. Yes, like always is system dependent but I think is worth the effort.

Pryso, by accident I test one of my Sp-10s with and with out strobe and I have to say that I can't detect any difference but this was in my system with that Sp-10. What makes a difference is the mat that you use on it.

Regards and enjoy the music.
Raul.

I recently got my hands on a NOS Tech SP-10 mkII. How does it measure up to other current high-end t/tables?

Raul,
I'm curious to know more about the mat you are using, and maybe some of the ones you have tried,
Thanks,
John