Amazing...

The Denon 47F is a very good choice if you do not want to do to much mixing and matching. The arm is a proprietary design which has its limitations but would not involve much in the way of set up. That or one of the Regas or Music Halls is a good way to give vinyl a try to see if its for you. But make sure your pre-amp or receiver has a phono stage built in. There is additional equalization and amplification required for a TT as opposed to a tuner or CD.

And don't be daunted by all the technical detail you read here. For me, 5 years ago, it was like trying to read a foreign language. Now I understand most everything I read, and I feel like I can make meaningful contributions.
Aside from being a bunch of opininated SOB's (we're famously that!), we audiophiles love to help each other out, teach, give advice, and try to help you get your maximum enjoyment out of your music and your hardware investment.
So stick with it, utilize this valuable resource (Audiogon), and before you know it that DP-47F will be making music you won't believe.

Cheers.

Thanks, this is my current setup:

Reciever; Pioneer VSX-94txh
Front; B&W 602 S3
Rear; B&W 601 S3
Center; B&W LCR 600 S3
Sub; Outlaw LFM-1

From Pioneer owners manual:
Turntables only: Connect the stereo audio outputs to the PHONO inputs.
• If your turntable has a grounding wire, secure it to the
ground terminal on this receiver.
• If your turntable has line-level outputs (i.e., it has a
built-in phono pre-amp), connect it to the CD inputs instead.

OK, so your rcvr has a phono stage. Its not likely to be super great; but it will give you an idea if vinyl is for you.

Bo you would most likely be better served by initially going with an entry or mid level integrated setup whereby everything fits together for you. After you become familiar & more comfortable, then you could either move up, or upgrade what you have.
Myself I have a reasonable level of experience, yet even I wouldn't try to piece something together as you propose. Having the senior members here help you out with recommendations for a complete setup is your most likely path to satisfaction IMO.
One could recommend the VPI HW-19 series as a good starting point with a flexible upgrade path; many options in that regard.
Specifically the HW-19 MKIII or HW-19 MKIV, which is where I started.
I'm sure there are others too but I couldn't say what... No offense, but I will say that at the Pioneer receiver level you really shouldn't get too carried away; the equipment just isn't all that capable.
You will need a higher output moving magnet type cartrige (vs. moving coil) for compatibility with your rcvr.