Technics SP-10 TT motor capacitors?

Dear Lew: I think I understand what you posted about and that kind of prevention is that: a prevention, I?m not against it.

What I say is that I don't know/read/experiences anywhere on that kind of failure in a SP-10, but could happen.

Anyway, the whole subject is that we have to take care on our Sp-10s, no doubt about.

My question still is the same: any improvement?

Regards and enjoy the music.
Raul.

Raul, Sorry for the tone of my post, if it was too intense. In response to your latest, I can only say that there definitely ARE reports on the internet, on various other sites, of SP10s that won't hold speed, that have lost torque, that are plain "dead", etc. It is not unlikely that many of these problems were caused by old electrolytic capacitors that had become leaky and then destroyed downstream transistors or ICs. As Strathorncat said, I don't expect any "improvement" over the basic as-new performance of a fully functional SP10 Mk2A.

Stay tuned for the battery-supplied SP10, however. (Not hard to do for the 5V supply.) That would be cool.

Some references on questions ask here:

Raul, I've wondered too about the potential for "improved" performance with tt parts replacement versus piece of mind from eliminating old parts. Albert Porter who is well known on A'gon for his rebuild of his SP-10 Mk2, chose to upgrade caps in the power supply but left his motor unit alone. And while this is not the same for a turntable where the parts are out of the signal path, my friend Dan Banquer posted this description of sonic benefits from parts replacements in a tuner.

http://www.audioholics.com/tweaks/do-it-yourself-diy-topics/revamping-a-vintage-yamaha-t-80-tuner

Now for Lewm, Strathorncat, and Raul, there is a chap in England who developed a replacement power supply/regulator unit for the SP-10s. Check his site (I'm not a customer and have only read his posts on VinylEngine).

http://www.sp-10mkii.com/

And lastly, for Raul and others with interest of moving all electronics away from the motor unit itself, here is a little info on such a project. Sorry that the translation to English is very rough. Such a project is way beyond my basic soldering skills but one can dream.

http://translate.google.com/translate?hl=en&sl=ja&u=http://homepage2.nifty.com/~mhitaste/audiotop/audio_apparatus_page/sp-10mk2.html&sa=X&oi=translate&resnum=1&ct=result&prev=/search%3Fq%3Dhomepage2.nifty%2B%2522Technics%2Bsp-10mk2%2522%26hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-US:official%26hs%3DbW5%26sa%3DG

And the famous Kaneta modification -

http://de.geocities.com/bc1a69/kaneta_eng.html

Happy reading and keep the information flow coming.

Dear Pryso: Great links, thank you so much.

Regards and enjoy the music.
Raul.

Pryso, I saw that UK site; in fact you may be the one that originally supplied me with the URL. Due to the devaluation of the pound vs the dollar, it's become a more reasonable proposition. Certainly, for anyone who is not into DIY and who has an SP10 Mk2 chassis but no PS, this is the easiest way to go. I had raised questions about their copper mat, which does LOOK delicious; at over 2kg, its mass could affect the servo mechanism, I think.