2. analog
  3. 1241114784

SME V arm: dynamic VTF or straight weight

I am using an SME V arm and wonder if anyone has compared the sound using the dynamic VTF (i.e. setting the dial to 2.0g) versus setting the dial to 0.0g and simply using the counterweight and an accurate scale to set VTF at 2.0g. Is there a sonic difference and what is the theory behind one versus the other?

I would think that using the latter method moves the counterweight closer to the arm's pivot point and effects how the bearing is loaded and possibly also the moment of enertia of the arm.

I have briefly tried to hear a difference, but couldn't and plan to do a more controlled comparison. Anyone's own experience would be appreciated. Thanks.

Peter
peterayer
albertporter's avatar
Ag insider logo xs@2x
albertporter
4,949 posts
 
I too am very interested in responses to this question, I was thinking about posting the same topic last week.

SME has the new V-12 tonearm, likely available in a few weeks. The current SME 312S is identical mass, identical construction (Magnesium) and identical bearings and internal wire.

The V-12 has the dynamic VTF Peter describes (above) and the 312S does not. I'm trying to decide how much if any this impacts performance.
jea48
4,446 posts
 
I am using an SME V arm and wonder if anyone has compared the sound using the dynamic VTF (i.e. setting the dial to 2.0g) versus setting the dial to 0.0g and simply using the counterweight and an accurate scale to set VTF at 2.0g. Is there a sonic difference and what is the theory behind one versus the other?

I assume the arm uses a spring for the VTF. With the dial set at 0.0g isn't the spring stretched out and more likely to vibrate? I would think you would want to set the dial to the maximum VTF and then use the counterweight to set the VTF. At least that is the way it is done on Rega arms with the VTF spring, when using the Heavy Weight counterweight.
Dynamic balance graduated vertical tracking force (VTF) control applies 0-3g x 0.125g through resonance controlled spring.
http://www.sme.ltd.uk/content/Series-V-1330.shtml
.
peterayer OP
1,382 posts
 
The other difference between the two SME 12" arms is that the 312S has a detachable headshell for easy cartridge swapping and azimuth adjustment while the V-12 has a fixed headshell for greater rigidity. I don't know if this difference is audible per se, but the possiblilty of adjusting azimuth is certainly a benefit.
More to discover