Influence of stylus shapes on distortion

Hi Stevecham
interesting, I see where you are coming from.

I had a 'special' Dorian (re-tipped with a Gyger Special, boron) and it was very highly resolved.
Now some experts would say --- too much. Giving you some 'information overload' not considered to make it so musical...
Me, I'm not sure, since I have not really heard e.g. some SPU 'Meister', 'Classic' etc. considered to be more musically involving, though NOT due to higher resolution. Now, these would sport round or elliptical styli at best. You also NEVER hear anyone using these asking about distortion!
I had issues with my Dorian. Using an SME V, I feel pretty certain it was not misaligned.

Any comment from some specific listening experiences, you mentioned having gone through quite a few carts, right?

Axel

Dear Axel: You point out one of the distortion sources: alignment set-up, and we have to add VTF-matching tonearm/cartridge resonance frequency range-AS-load impedance-and the like.

A stylus shape between its shape design has no self distortion other than the one generate for the tracking it self. What generate distortions are poor alignment, poor recordings, poor matching, poor cartridge design/suspension, poor, poor, poor, etc, etc.

A well cartridge design ( either stylus shape ) with the whole correct set-up makes no other distortion that the " natural " one of its work.
Of course that different stylus shape ( everything the same ) give us different information range level.
Of course too that the distortions generate for different stylus shape are different but the important subject is what we can hear about those distortion differences.

I have some same cartridges with in the same model different stylus shape: spherical-elipthical and eliptical-fine line.
In the last case the cartridge sound with the elipthical stylus seems to me a little more relaxed than with the fine-line and I almost can't heard/hear more information through the fine-line.

The distortion subject on stylus different shape that we can hear is very dificult to be precise and absolute on it from the point of view ( like I say ) of what we hear and depends on the whole cartridge design and excecution of that design.

A ML-Fine Line stylus design can give us more information but its whole set-up it is more " delicate " and if it not right on target we can have higher distortions than in a elipthical one. So it is not easy to be " absolute " on the subject.
There are differents ML-Fine Line shapes as different Elipthical ones ( on dimensions shape. ) .

Then we have to be very experienced to say " that is a stylus shape distortion " and " that is part of the recording " even to know when a " sound " is higher or lower in distortion, this is very dificult to discern and only if you are at a very high position on that learning curve you can discern it and obviously with the right audio system: a very low overall distortion system.

Of course that everything the same it can be measure that " natural " each one stylus shapé distortions.

Regards and enjoy the music.
Raul.

Dear Axel: That was an answer from a " music lover ", I think that the cartridge designers can give us a more precise answer. Maybe JC could help us.

Regards and enjoy the music.
Raul.

Raul,
please give me the answer from your " music lover " point of experience about using (always well set-up) a Windfeld with 'Nude Ortofon Replicant 100' stylus (fine-line, yes?); 16CD compliance, or a SPU Royal with the same stylus but 8CU compliance on the same SME V arm.
Cart weight is 13g in the former, 12.8g in the latter. VTF 2.6g and SPU 3.0g

What is your take?
Axel

Dear Axel: Here I give you some info about:
http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1235522919&openflup&54&4#54

was not an in deep sessions and maybe at my place the precise/exactly tonearm/cartridge set-up was not right on target but anyways give us a " clear idea about.

I try " hard " with the Ortofon MC 7500 ( same stylus shape that the Windfeld and very close cartridge characteristics.) and is a very sensitive to VTA/SRA changes, it likes to run almost flat/parallel to the record for you can achieve its top quality performance.
It runs good on the SME IV but works better in other of my tonearms. Now, we can take in count those differences on cartridge quality performance only if we have on hand other tonearms to make a comparison, its the only way to understand its true performance.

Sometimes I or some one else say " that tonearm is not a good match with that cartridge " or at the inverse and this kind of stateent not necessary means that that cartridge will perform bad NO.

Usualy a top cartridge performs good in almost any " decent " tonearm and for many of us that " performs good " is enough to enjoy it.
In the other side there are other people that are looking not only for a good cartridge performance but for its best on that cartridge and here is where our tonearm " hunting " begin trying to find the " magic " match.

Btw, I don't have any experience with the Royal. Which yours?

Regards and enjoy the music,
Raul.