Dedicated phono-pre for MM only?

Kirkus,
y.s.:
>>> I feel that in a high-quality phono preamplifier, ALL harmonic and IM distortion should be completely and totally buried in the noise floor, which in itself should be very low. Yes, low-order and even-order products are less disconcerting to the ear . . . but who wants any of it at all?"

Some would not agree with this necessarily, since other then in digital designs, harmonic distortion is never buried in the noise floor completely.
It seem current understanding that harmonic distortion should rather RISE evenly (even- and odd-order equally) with increasing output, rather than then decreasing with higher output. (Output rise as from cart input rise)

Two notable designs come to mind by PassLabs (SUSY, Super Symmetry) and the 'cyclotron' (re-invention) by the Thorens TEM-3200 mono blocks have proved that to be correct.

Item: 'ground contamination' as you pointed out is more of a challenge then maybe generally accepted? And we are not talking of major ground loops.
I is VERY difficult if not impossible to prevent some potential differences occurring in components (and amongst each other) during all states of operation. So they best possible directed by use of e.g. star-ground schemes. The point is, there are still caps (to ground) involved and caps have power factors, creating a far less 'clean' signal path then the dedicated (-) in a balanced design.

The noise floor of my ML326S is below 90dB (balanced). I think the issue is the 'tonality', influenced by 'combing out' harmonic distortion selectively. It is why even a MUCH noisier single-ended design often will sound 'better, more natural' then does a balanced one. (I speak from experience)
The trade-off is most always balanced = more dynamic, and 'cleaner' vs. unbalanced = better harmonic completeness, more natural sounding.

As to hum caused by 'unbalanced' MM cart output impedance. Well, I think that the more expensive carts we are speaking of (Raul mostly), those have always excellent channel balance, often better than more main-stream MCs with an e.g. <1.5dB spec.

I run MMs into my (balanced) ML phono-board and have no discernable noise (ear to the speaker)!
This at elevated listing level setting ~ 45 (max = 80, grading in dB steps).
Adding 35dB (level 80, that would destroy my ears first, and speakers next!) I can practically NOT hear noise from the listening position (this @ 60dB 'normal' daytime background noise).

I guess, ML is very good at what they do with their balanced designs ---- however, tonality and 'live like' emotionality is not exactly their forte.
One always seems to find that with 'noisier' and most always single-ended designs.
That's where I see the trade off.
Balanced = Hyper-clean and dynamic vs. unbalanced = naturalness, less clean, and better harmonic completeness.

All is of course subject to some generalisations and subject to levels of degree.

Axel

This seemed to work for LOMC cartridges such as the DV1s and Universe (which only produced a slight hum when the volume was turned up considerably), but fails miserably with the MM which produces an incessant hum at any volume.

Halcro, please understand that I mean no disrespect to Bruce Candy or the namesake of your moniker . . . but unless the Continuum tonearm's wiring scheme is unconventional (in a connection sense, not just in a twisted-wiring sense) or defective (i.e some metal tonearm parts accidentally ungrounded) . . . then the problem is your preamplifier, and the manner in which its input stage is designed.

There seem to be many designers who look at balanced input stages (both line, phono, and microphone) purely as a pair of opposing voltages, not balanced impedances . . . and its amazing how many otherwise top-notch pieces of professional and consumer audio gear are very intolerant of the slight impedance mismatches that I describe. Another example of this would be the work of Douglas Self . . . a designer who I greatly admire and find much of his work invaluable . . . but simply cannot agree with his approch to designing balanced input stages.

But hopefully its just something silly like an a missing/loose ground wire somewhere, and my little diatribe is all for nought.

Hi Axel,

Some would not agree with this necessarily, since other then in digital designs, harmonic distortion is never buried in the noise floor completely.

Sure it is - just about any datasheet-derived single-NE5534 phono stage will do it, for reasonable signal levels and output current. I obviously don't feel that such circuits are ultimate expression of what's possible in a phono preamp, but the only reason to tolerate measureable harmonic distortion in these circuits is if the designer feels that there are benefits to choosing certain types of parts or topologies - and these choices make it impossible to eliminate distortion. I have no problem with that . . . every designer is free to decide what parameters meet their goals - ultra-low distortion just happens to be one of mine.

It seem current understanding that harmonic distortion should rather RISE evenly (even- and odd-order equally) with increasing output, rather than then decreasing with higher output. (Output rise as from cart input rise)

I believe that what you're referring to is a specific type fault that many feel can occur as a result of crossover distortion in Class B power amplifiers. Again, a phono preamplifier can and should be completely free from these types of anaomolies.

I is VERY difficult if not impossible to prevent some potential differences occurring in components (and amongst each other) during all states of operation. So they best possible directed by use of e.g. star-ground schemes. The point is, there are still caps (to ground) involved and caps have power factors, creating a far less 'clean' signal path then the dedicated (-) in a balanced design.

If you re-consider Kirkhoff's laws and look at the signal CURRENT, it always must flow between the power-supply rails, period. The purpose of local bypassing capacitors is twofold - first, to remove the effects of power-supply wiring and traces from the circuit, and second, to prevent different stages' current draw from affecting each other. These functions are necessary in both differential and non-differential circuits, and regardless of whether or not the signal VOLTAGE is defined in relation to ground, at least a portion of the signal CURRENT will always flow through the bypass capacitors . . . and that's the way its supposed to be. It is up to the designer to keep these signal and supply currents separate from each other, regardless of whether or not they flow through a node we call "ground". In fact, it can sometimes be more of a problem in differential circuits, where each side of the circuit has separate bypass capacitors to ground . . . in which the signal current has to flow through a minimum of two capacitors and a ground trace to return to the supply.

Its not that I don't like the differential approach, in fact my linestage is designed this way. But I will confess that I'm especially proud of the bypassing scheme - there are separate, unambiguous AC return paths for both differential signal current and signal current that flows to ground (i.e. from an impedance imbalance in the output cable or the amplifier that follows it).

The trade-off is most always balanced = more dynamic, and 'cleaner' vs. unbalanced = better harmonic completeness, more natural sounding.

I firmly believe that as we improve our art . . . it IS possible to have all of what you describe, without tradeoffs. And not everybody will see it the same way, but hopefully we will all end up with a more fulfilling experience from our recorded music.

Axel, You wrote:
"As to hum caused by 'unbalanced' MM cart output impedance. Well, I think that the more expensive carts we are speaking of (Raul mostly), those have always excellent channel balance, often better than more main-stream MCs with an e.g. <1.5dB spec."

I am pretty sure that Kirkus was not referring to differences between channels in his comments on the impedance properties of MM cartridges. I think he was referring to the generally much higher and more reactive impedance of MMs and the fact that these parameters may not be identical for each phase of the output in a SINGLE channel, using a balanced circuit. This creates a noise that cannot be cancelled by the balanced topology and is instead amplified. Channel balance has nothing to do with it. If I am full of baloney, perhaps Kirkus will correct me.

Lewm,
of course you are right! We are talking one channel at a time, sorry.
>>> ... he was referring to the generally much higher and more reactive impedance of MMs and the fact that these parameters may not be identical for each phase of the output in a SINGLE channel, using a balanced circuit <<<

I see, but then this would be a GENERAL issue with every kind of MM?!
They ALL have a much higher reactive component than any MC.

Now why do you think, do I have NO hum what so ever with a FULLY opened pre, going balanced into a balanced phono-line-pre?

Maybe the answer lies with ML's balanced design then?

Axel