Why is the price of new tonearms so high


Im wondering why the price of new tonearms are so high, around $12k to $15k when older very good arms can be bought at half or less?
perrew
Syntax,
yet more room for continuous improvement?

"Watching Chinese TV can be very interesting", you say --- you are knowledgeable with this too?!

So how's your Mandarin, your Latin seems jolly good?

As to: I don't get "it".
That depends on your definition of "it".
Is "it" static or dynamic?
Greetings,
A.
Let me stick my oar into this old debate - Mark Kelly is exactly correct and Dertonarm is completely off base in his comment that " the inertia in a say 15 grams effective mass 12" tonearm with a given cartridge is always larger then in a 15 grams 9" tonearm".

The effective mass of a tonearm is in fact the inertia of the tonearm when it reacts to a deflecting force, which is what a warp is - that is what effective mass is BY DEFINITION. This is first year college physics. If the effective mass of a one tonearm is the same as the effective mass of another tonearm, it has EXACTLY the same inertia to a warp, regardless of its actual mass or physical dimensions.
Well Jlin, you will certainly find a lot of people agreeing with you. I for one like to look at all things a bit closer than most others. So please excuse me if I come to some different results. I am used to find the errors in other peoples thoughts. In fact - I earn part of my income by finding errors in concepts and setting them straight.
Just give it a thought .... maybe there is some truth in my point of view (just as a hypothesis...) and there are more physical details and interactions then meet the eye.
This is not 1st year college - this is still lower high school .......
But the model is still too simple as described earlier.
Effective mass is not the same thing as the mass of the tonearm. It seems people are confusing these two terms. My SAE tonearm, for example has an effective mass at the headshell of 9.5g- according to my owners manual. The entire tonearm and counterweight certainly weighs more than 9.5g. The tonearm manufacturer has simplified a more complicated inertia calculation into an easy to apply value- effective mass. Now, I can add the mass of my cartridge to the effective mass of my tonearm and then apply the compliance of my cartridge to find the Resonance Frequency, Fn of my Tonearm/Cartridge system using: Fn=sqrt(k/m) where K=compliance (N/m) and m=mass (kg). Ideal Fn is around 10Hz. I recently lived this issue when I mounted my new Denon cartridge to my SME tonearm. The SME is a relatively low mass tonearm. The Denon cartridge has a mass of 8.5g and a compliance of 7.5X10-3N/m. This put my system Fn at about 16 Hz. (Insufficient mass) This was too high. I was fine until I tried to play a record that had a slight wave to it. The tonearm would dance across the record. I could see the cantilever move upward and kick the tonearm into the air. Searching AudiogoN, I found a place in England that sells a 4g mass (Aluminum) with threaded holes specifically made for the Denon cartridge. The added 4g mass lowers my Fn to just over 10Hz. I applied the mass to my cartridge and now it plays that same record perfectly. I also knew the added mass would work because my now dead Koetsu cartridge had a mass of 14g. I also found this 4g Al plate improved the sound of the Denon. The bass is better and imaging more focused. Not bad for a $19 tweak w/shipping. I have always had heavier (14g range) cartridges in the past and so never encountered this issue before. I could see how these kinds of problems could be frustrating to someone not trained in Engineering.