REL Magic


I have to report this finding as a breakthrough to a new plateau. For the past four years, I have been running two REL Strata III's, one behind each Maggie 3.6R. RELs have always been known for their hook up at the speaker outputs. By this method of integration, REL boasts that their subs somehow lift the entire system. I have always felt this to be true, especially with one for each amp.
But now, I have just completed DIY signal cables for each sub using the same Neutrik connectors into the subs. I used some 16-gauge OCC copper wire by Furutech in the same terminal scheme as the stock cords. As expected, the bass notes are more extended and better defined, but this phenomenon of improving the whole presentation has also appeared again as even more impressive. Everything across the soundscape is just a bit more sweet and clear. If you have not upgraded your REL signal cables, please do.
128x128jafreeman
Rockyboy,

I spliced Furutech speaker wire onto the amp ends of the Synergistic Research REL reference and the improvement made the SR wire sound pale in comparison.
In my simple mind I'd have to think that removing SR wire altogether and using only Furutech wire with a neutrik termination would be better yet. Where am I going wrong?
Rockyboy,

You may be right. It is just that I only had a short run of Furutech. So, I did the splice.
Hello there,

I own a subwoofer REL B1 (version 220/240 Volts) and I would like to replace the mains fuse with a SR20, but I apercu that there are two others on the main board of 6.3 Amps I believe if I read correctly (can anyone confirm?), I also have to replace them with fuses SR20 for best results ?

What type of fuse SR20 choose for my REL B1, slow or fast ?

Thank you very much for your help
Thanks! for sharing Jafreeman. I concur that REL is the best sub out there. Excellent build quality, outstanding sound and very easy to massage into anyone's system. Happy Listening!