effective mass ???

You can get the manual if you are registered at The Vinyl Engine.Cartridge weight can be 3-17gms and with optional ring weight 15-42gms.

Dear Richard: I own that unipivot tonearm and is very good.

Do you want to learn/education?, then my advise is that try/test your cartridges with and decide. Remember that the tonearm accept different weight headshells so you can choose different ones with different build materials and these facts could help you to tame the cartrdige sound reproduction to your own priorities.

I already try with this tonearm several cartridges ( MC/MM ) with different compliance specs and till today I had not any single trouble.

Regards and enjoy the music,
Raul.

Hi and thanks for the responses. Per the instruction sheet suitable cartridge weight should be 3-17 grams. Is that including the headshell. Where does the headshell weight come into play. When the headshell weight changes does the effective mass change and is that why effective mass is not listed for arms with removable headshells? Thanks
Richard

The Grace 940 is an S-shaped tonearm with an effective length of 237 mm according to the specifications. If you look at the effective mass of several similar tonearms from the era (SME 3009 II, Micro-Seiki MA-505, Fidelity Research FR-64fX) they all run about 4-6 grams effective mass NOT counting the headshell. This is based on tests by Hi Fi Choice back in the 1970s and 80s. So figure that 5 gms is a good guess and close enough for the 940.

To get the total effective mass you then add the mass of the headshell (anywhere between 6 gm for the skeletal shells such as the perforated SME, to over 20 gm for the heavyweights) plus the mass of the cartridge. For example if your headshell weighs 8 grams and the cartridge 9 grams then the total effective mass is 5+8+9 = 22 gms. Note that the total effective mass is dominated by the headshell and cartridge weight, so any error in the weight of the tonearm minus the headshell is negligible.

The suitable cartridge weight range does NOT include the weight of the headshell. However, that range is likely based on the stock headshell, so if you are using a headshell that is significantly heavier, for example, you may not be able to balance a heavier cartridge even with the balance weight all the way back.

Jlin, thanks for a very informative post, I really appreciate it. I have been trying to understand this for some time now, and I guess it was an evolution of questions that brought me to an understanding. thanks again
richard