Audioblazer, can you confirm the anto-skate does work on your arm? Or simply you just has some concerns on how it works.
If all parts intalled properly on Raven 10.5 arm, I think AS will work. The way it works I believe is that the magnet in the big AS screw will pull the front corner of the bearing house (on the side of armtube), but will push the rear corner. Both push and pull forces on the bearing house will result in AS force as a net effect. I don't know whether a detailed calculation was ever carried out, but in general, when the arm on the outer side, pull force is a bit larger than the push, when the arm is closer to the record label/spindle, the pull might decrease a bit since the front corner is moving away from the Big magnet screw, but the push force on the rear corner will increase since it is moving closer to the magnet. So overall, the average AS force during the LP play might not drastically change that much. But this is only on the ballpark not from calculation.
Unfortunately, somehow the installation of magnets on my Raven 10.5 (bought used from a agon member)is reversed, so I have been puzzled all along about AS on Raven 10.5. What I experienced is not Anti-Skate but Anti-Anti-Skate, the result is over skate which has effect of skipping, channel out of balance (not by much). Waiting to be fixed. The fix is easy though.
If all parts intalled properly on Raven 10.5 arm, I think AS will work. The way it works I believe is that the magnet in the big AS screw will pull the front corner of the bearing house (on the side of armtube), but will push the rear corner. Both push and pull forces on the bearing house will result in AS force as a net effect. I don't know whether a detailed calculation was ever carried out, but in general, when the arm on the outer side, pull force is a bit larger than the push, when the arm is closer to the record label/spindle, the pull might decrease a bit since the front corner is moving away from the Big magnet screw, but the push force on the rear corner will increase since it is moving closer to the magnet. So overall, the average AS force during the LP play might not drastically change that much. But this is only on the ballpark not from calculation.
Unfortunately, somehow the installation of magnets on my Raven 10.5 (bought used from a agon member)is reversed, so I have been puzzled all along about AS on Raven 10.5. What I experienced is not Anti-Skate but Anti-Anti-Skate, the result is over skate which has effect of skipping, channel out of balance (not by much). Waiting to be fixed. The fix is easy though.