Dear Raul, I think it is a bit too strong to use the word "charlatan" in this regard. In English a charlatan is a "deliberate liar". If anything, most of us are only guilty of generalizing too broadly from relatively limited direct experience or controlled experimentation, where even in the best of circumstances, the results are based on subjective judgement. So, I can only say that seating the Lenco, Denon DP80, and SP10 Mk2 in slate plinths where I have also coupled the tonearm to the solid slate (no discrete armboard) results in making these three different tables sound much more alike than they did before. And they are all much more neutral; they have lost colorations that most of us can associate with the three products. They are more neutral without being "dead" sounding; the liveliness associated with idler- and direct-drive is still very much in evidence. Ergo, IMO, in this little experiment, slate is good.
Best TT plinth material, cost no object
It is said that the best material with which to build a loudspeaker cabinet is LEAD, the second best is concrete and the third is Aluminum. Only the third has been adapted by the industry, for obvious reasons.
Internal and extraneous vibrations need to be dampened or eliminated if sound smearing is to be reduced,
Now to the turntable; remove it from the influence of vibrations, internal vibrations not withstanding, and the vinyl should sound better.
Not all of us can put the turntable outside on the sidewalk where only the elements can affect the sound, but can we make the plinth so HEAVY that we can come close to removing the turntable from the sound room entirely?
Can a lead plinth, not too practical, get us as close as possible to putting the turntable outside, on the concrete walk?
Your thoughts, Ken
Internal and extraneous vibrations need to be dampened or eliminated if sound smearing is to be reduced,
Now to the turntable; remove it from the influence of vibrations, internal vibrations not withstanding, and the vinyl should sound better.
Not all of us can put the turntable outside on the sidewalk where only the elements can affect the sound, but can we make the plinth so HEAVY that we can come close to removing the turntable from the sound room entirely?
Can a lead plinth, not too practical, get us as close as possible to putting the turntable outside, on the concrete walk?
Your thoughts, Ken
- ...
- 43 posts total
- 43 posts total