2. analog
  3. 1267549079

Next upgrade?

Just looking for an opinions on what my next upgrade should be. I have a VPI HW-19 Mk. III with a Rega 300 tonearm. The cartridge is a Grado Reference Platinum. This goes straight into the phono section of a Mcintosh MA6900. I have about $500 to spend on an upgrade, and didn't know where to go next. I'm leaning towards a new cartridge (Dynavector 10x5) and getting a Mint Tractor to align it. But maybe all I need is a phono stage? Any help would be appreciated. Thanks!
helmuthed
zmanastronomy's avatar
zmanastronomy
738 posts
 
Get a hooker.
polk432
1,142 posts
 
I have a Mint LP and it is a great tool. I also have a Dynavector 10/5. Be very careful with these! They bend very (too) easily. This is the 2nd one I have carefully mounted and even though they sound good, to me they are a piece of junk, since I had no trouble mounting Linn K18's and Nagaoaka's using the mint LP. Try one first with your cart. Also get as high powered a magnifier you can get (maybe from a coin shop) and have plenty of natural light. It is about a 2 hour job the first time around. For $500.00 get two Hookers. Best of luck
213cobra
885 posts
 
Put a set of Aurios media bearings under your VPI. Preferably four if you have leveling feet or cones on your VPI. This will cost you under $300, and will make a bigger sonic improvement than anything else sensible to be done with your existing gear. If you don't have your turntable on a slab of maple, spend the rest on that. If you don't have cones, get some. Your VPI 19 on cones on Aurios on maple will sound surprise you, and give elevate the platform for subsequent upgrading of cartridge, phone section, etc.

Phil
tsciame
88 posts
 
used sds
More to discover