Anyone using a Lyra Delos yet?

Actusreus!
I know, and I understand why your wonder.
Because I have a Mint Protractor made for AirTight PC-1 with distance 9.5 mm from needle - cartridge front. That would save me an order for a new.
I still have the same arm.

Many Thanks!

Clabe,

It doesn't matter. You are fine. Your Breuer 8C tonearm has slots in the headshell to allow you to get the correct effective length for the Delos.

You don't need another Mint LP Protractor.

Just leave the arm alone (don't change pivot-to-spindle distance) and install the new cartridge. You can adjust the cartridge in the headshell to get the correct overhang.

Again, the most straight forward approach, if you don't move the pivot-to-spindle distance, you are fine and the adjustment should be a snap to get the new cartridge to track the arc.

Dre

Clabe,

To the best of my knowledge, the Mint Tractor is made for a specific tonearm, not cartridge. If all you have changed is the cartridge, any variations between the Delos and Air Tight are irrelevant. That's the whole point of having the Mint--it lets you align any cartridge mounted on the tonearm the Mint was made for.

Hi Gyus!
What would I do without your valuable tips.
I had the impression that it´s combination of arm/cartridge-data that´s needed for making Mint Protractor.

Many Thanks!

Clabe: For the Delos (and Kleos), the nominal distance between mounting screwholes and stylus is now 9.68mm (+/- 0.141mm). This is with rated tracking force (1.75g) applied. (Note that there is a possibility that the nominal 9.68mm distance may be changed slightly in the future, likely on the order of 0.1mm or a maximum of 0.2mm).

I will try to answer any other questions when I get the time to post something meaningful (may take a few more days).

hth, jonathan carr