Azimuth and the Fozgometer

Lewm: Unlike the Foz the Cartright is based around a record and test signals. Plus I'm not sure I understand what size has to do with it ;-)
Yes Peter is a unique character in out hobby and deserving of respect. Let's wait and see what he comes up with. It should be revolutionary for sure knowing him.

Just sayin' that when I saw the actual size of the Cartright, I was surprised since some of its announced capabilities normally require a bench full of equipment. But, like you, I have an open mind.

Madfloyd,

The foz works as advertised, the problem is quality control from whomever is building them for fosgate.

As stated above check to make sure the lugs for the meter are not shorting to the chassis. Mine was like this when received it, you could just insulate with electrical tape as a short term fix or put a dremel to the lugs like I did.

Another control issue, this is something you will need to do now is recalibrate since you played with the trimmers, is that between the two that I have had on hand to use one was not claibrated correctly from the factory.

See this link for the download and how to

http://www.musicalsurroundings.com/fozgometer.html

and this one for a copy of the manual.

http://www.musicalsurroundings.com/Manuals/manuals_fosg.html

When you get it working right try it straight from the tonearm. I used mine to measure a very low output mc with no problem.

When working it is a dream, the sligtest adjustment of the headshell makes a big differance.

Brad

Hi, Mauidj; the Fozgometer also uses a record and test tones to measure crosstalk and determine any adjustments needed to correct azimuth.

Brad, thanks for the post. The Fozgometer is being criticized by people that have never used it to set azimuth. And the complaints by people that have used it may or may not be related to how well the Fozgometer functions. I get the impression that 1) there may be cartridges that are at the limits of "acceptable tolerances" that are causing problems, 2) there MAY be some Fozgometers with quality control problems, and 3) some people may not be using the Fozgometer properly.

I agree with Lew that the documentation about, and the user guide for, the Fozgometer is minimal (probably intentional) and so speculation and the possiblity of user error is elevated.

Regards,
Tom

Hey Tom, agree the marketing, quality control and reports of users having problems have given this product a bad rap and rigtfully so.

To the spectators if you could see and work through the above you would be rewarded with a nice tool. Another thing is I would recommend using the recommended test LP due to it is cut hotter than others which should help with the readings.

Brad