2. analog
  3. 1284754407

Ditching anti-skate?

Had some issues with the anti-skate settings on my Clearaudio TT. No matter how the weight was adjusted, the arm was always swinging back to the periphery of the record when I used the arm riser. So, I asked my dealer, who sent me to his distributor....what he said surprised me. Basically, he said that anti-skate is useless. A myth propogated by customers feeling that no anti-skate adjustment will make customers thing that the design is "incomplete." He says that anti-skate actually causes the stylus to "wobble" in the grooves, increasing wear to both record and stylus, as well as robbing the TT of bass, since most of the bass in records is at the bottom of the grooves. So, I bagged the anti-skate completely. Right or wrong?
afc
mickeyf
153 posts
 
sounds like 40 minutes to play a 19 minute side. no fun, it's not about enjoying the music if you have to go that far.....
stefanl
296 posts
 
Lloyd Walker of Walker Tables has a set-up faq on his site that recommends playing an album to first warm-up your system(there's the 40 minutes)before you fine-tune.That's what's considered normal in his regime.Plan on spending some time listening.You get used to doing it and it's actually fun!
mfsoa
76 posts
 
I ditched it on my ProJect Perspective Carbon and it sounds much better w out that dangly thing attached to the tonearm. Makes me think that there must be a better way...
-Mike
geoch's avatar
geoch
354 posts
 
C'mon you guys,
We are in analogue domain here!!
Don't expect to just push a button of your remote and enjoy the analogue heaven. The antiskate force is a very easy & standard procedure that is as necessary as the VTA and even more so, because once you find the right value, you don't have the choise for experiment other settings.
It's so obviously THE RIGHT VALUE !!!
(of course for the given groovy track of the test record).
Don't say please that you don't have a test LP.
The sad truth is that only few arms can provide a gradualy increasing force across the LP.
In that situation I would choose to buy the arm that povides ALL the alignments. (and azimuth too!!!)
George
sutherk
18 posts
 
I run my anti-skate control at about 75%-80% of the recommended value. That is, I run my cartridge at 2.05 grams VTF so the anti-skate control is supposed to be set at 2 to match but I find that setting it at 1.5-1.6 gives me greater soundstaging and "freedom" of sound in terms of air around instruments etc.

Any less than this and I get strange sounds around the two null-points on the record and any more that the 1.5-1.6 starts to crush the soundstage.
More to discover