VPI Classic hum

One way or the other, I'm going to resolve this today. I'm taking the table back with my preamp and cassette deck and going through the trouble shooting process with my bud. What I've found is that if I disconnect the belt from the motor (let it wrap it's self around the platter). Then place a record on the table with the arm down touching the record and after that select source monitor on my Nak and plug in a set of head phones to the deck I can clearly hear the motor noise (hum) when I turn the motor on and off. This same hum is what I hear on the tapes that I'm making and now it's really bothering me. So I'm going to take Bifwynne's and Macdadtexas advice and get a Soundsmith Zypher or Dyna 20X2H.

Found the source of the problem. New parts are on the way and will be installed tomorrow.

Macster, so what is the source of the problem?

The motor and I know that it's a "duh." But I will elaborate more after my parts are in. I would "highly" recommend that anyone who has this problem to work with VPI and the dealer to resolve it. Once my table is finished, we'll be certain of the "fix" as I have my Goldring GL2500 in it and it was humming with the motor turned on, with the arm down on the record. When you turn the motor off the hum stopped.

Again, the whole approach on this is to find the problem and fix it. If you think about it installing a shielded cartridge does not solve the problem. If you want you can email me @ blkmacster@nosapam.cox.net, of course remove the nosapam.

96% of the hum is gone. No hum at all just listening to records through the phono section. I still get some (albeit at a very low tolerable level through my headphone jack) Cost $140.00 for a new motor. I'm still in the process of listening to a variety of records and checking things out.