Hi Nick_sr,
The Copernican view of the armpod and tonearm as the centre of the turntable system, is predicated on the fact that the armpod is an 'immovable' object.
How that is achieved is open to debate.
I prefer to see mass (and plenty of it) concentrated on 3 spikes which would be equivalent to tons per sq in 'digging' into the supporting shelf.
You would be surprised how difficult this is to move without lifting the pod off one or more spikes. And that is how the correct Spindle to Pivot distance is accomplished......by tiny lifts and nudges of the armpod.
Until you try it you won't believe how easy it is and how accurately it can be achieved.
As you correctly say........isolating the tonearm from any motor noise or platter vibration is a huge benefit and can only be achieved in this way for Direct Drive and Idler design TT. Belt-drives can have (and often do) their motors isolated from the platter and plinth via a separate module.
The degree of stability and ease of set-up is something that differs with each solution and is something you quite rightly point out.
The Copernican view of the armpod and tonearm as the centre of the turntable system, is predicated on the fact that the armpod is an 'immovable' object.
How that is achieved is open to debate.
I prefer to see mass (and plenty of it) concentrated on 3 spikes which would be equivalent to tons per sq in 'digging' into the supporting shelf.
You would be surprised how difficult this is to move without lifting the pod off one or more spikes. And that is how the correct Spindle to Pivot distance is accomplished......by tiny lifts and nudges of the armpod.
Until you try it you won't believe how easy it is and how accurately it can be achieved.
As you correctly say........isolating the tonearm from any motor noise or platter vibration is a huge benefit and can only be achieved in this way for Direct Drive and Idler design TT. Belt-drives can have (and often do) their motors isolated from the platter and plinth via a separate module.
The degree of stability and ease of set-up is something that differs with each solution and is something you quite rightly point out.