A Copernican View of the Turntable System

Lewm,

All too confusing an analogy for me. The SP10's peritoneum would surely be the motor case rather than the additional plinth!

Designs seem to vary but operational excellence needs to be assessed in the light of the object and function under consideration: 'just as' arthropods function well with an exoskeleton but I function best 'keeping mine' internal.

I'll just press on with my efforts to discover how the SP10 and its associates function best. Who knows, when all is said and done, I could end up sharing your anatomically grounded perspective. Time will tell.

As always...

Dgob, Sometimes I go for humor ahead of substance. Just kidding. We all know where I stand on the issue of plinths. I have done the work to reach my conclusions, so I feel ok as regards my own preferences and my own system. However, I am beginning to think about an inert plinth that provides a lot of mass mostly under the platter/motor assembly, so there is a minimal "deck" extending out around the platter periphery. Then a pod for mounting the tonearm, like the ones some of the guys have built, that would be firmly mated via a structural member, back to the main plinth. A few commercial products are built that way. I do not back off my contention that a closed loop connection between the tonearm bearings and the tt bearings is desirable, as Dover mentioned.

Lewm,

It sounds interesting and I'd be interested to hear about the outcome of your experiment. The closed loop arrangement is precisely what I'm trying to test while optimising the isolation in light of other decoupled approaches.

Experientially, (as everyone is probably aware) I am convinced by the performance of an SP10 on pneumatic footers with a decoupled tonearm arrangement: the sound is exceptionally good and greatly exceeds all of my prior analogue experiences. However, I am really only interested in obtaining the optimum performance from my gear and that could very well lead me to share your beliefs - even though I remain quite dubious. I will give it my best shot and see what that brings.

As always...

Lewm,

And the humour was appreciated.

As always...

Lew, you just described what I have evolved to with my own design. Hopefully now my local woodworker can turn it out for me.