Brinkmann Bardo vs Transrotor Fat Bob Reference

I don't know about the Bardo, but the SP10 external power supply converts AC from the wall socket to DC and delivers three discrete DC voltages to the main chassis. I guess it could not hurt to supply it with "clean" AC, if one lives in an environment where the AC could be contaminated with noise from machinery, etc. But Glai, if your SP10 was not running rock solid at speed before you interposed a conditioner, then I would posit that it is not performing optimally, possibly due to bad electrolytic capacitors, if you've never replaced them. I was supposing that the Bardo motor also runs off DC derived in its outboard supply, when I stated that an additional outboard supply, between the wall socket and the Bardo box would be redundant, at best. What I meant was that there would be no expense with respect to purchasing something like a Walker Audio Motor Controller or VPI SDS, or the like. AC regenerators or purifiers and whether they help is another matter.

I merely want to state my experience that cleaner power improves the playback of the Bardo which the OP is interested in.

My Bardo and Sp10mk2 both benefit from cleaner power. THe SP10mk2 even more so. This experience is different from " The Bardo, like all direct-drive turntables, must include its own outboard power supply which needs to be linked to the motor speed via a servo, in order to stablize the drive. In this case, additional AC treatments preceding the motor supply module are unnecessary if not even a bad thing".

My Bardo has the upgraded power supply and the Technics SP10mk2 is from Artisan Fidelity with new caps and more. Both hold speed without and with the power conditioner. In the case of Brinkmann, there are power supply options with both their DDs and BDs which change the sound significantly. Maybe your sp10mk3 has a better designed power supply that takes this out of the equation.

I am in the suburbs not very far from power line with a dedicated subpanels and lines installed by AV solutions. The AC off the wall rages from 119V to 121V. Crude THD measurements is 4%. Unplugged from the wall, the regenerate AC is 120V with 0.8-0.9 THD.

The improvement I hear seems to be more than just speed stability. I suspect that it is related to less vibration of the motor. The noise floor drop away with softer notes played softer and overall increased in dynamic range and more focus. The gains on belt drive are less.

Glai, I apologize if I sounded offensive or aggressive. I thought you had written something to the effect that you "noticed" improved speed stability when you introduced the AC regenerator. This to me meant that you looked at the little strobe device on your SP10 and could see that the orange and black display was noticeably more stable, which is what prompted my remark about capacitors. On the other stuff, it seems we are in agreement.

By the way, please don't laugh, but my SP10 Mk3 is still sitting on the floor in my office/study. I have yet to put the plinth together and have been quite happy with my Kenwood L07D and my Lenco, in the meantime. I did make some progress over the weekend, and there's not much left to do except to drill the armboard.

I tried the Bardo. Almost bought it. Hesitated and ended up buying buying a Simon Yorke

As a recent buyer of a Transrotor Fat Bob, I agree with all that was said about its performance above. Fit and finish is superb, and it is as quiet as I have ever experienced. dynamics are startling. Well worth the purchase price. Currently using a Monster Alpha 1 cartridge. While my listening time has been short, I have not found any area of complaint yet.