Vintage DD turntables. Are we living dangerously?

The glass platter mat arrived yesterday beautifully packaged and included an ingenious silicone rubber record puck which squeezes the record onto the the vinyl without adding weight over the spindle..😎
The glass mat is beautifully made and I tested it on its own as well as with the Victor Pigskin mat both under and over it.
It was easy to dismiss the silicone puck as being inferior in sound to the heavy Yamaha record weight I usually employ...😊
To cut a long story short....the results were quite similar in all respects to the Achromat with the glass being slightly better....
The clear winner was again the Jico thin leather mat....
As always....YMMV..👀❓

Totem395,
Thanks for the info. It seems like torque or lack of, and speed correction circuitry are major contributors to SQ of various DD's. I saw a GT2000 years ago, but never had the pleasure of playing with it. If the motor can power a 18kg platter, one would think it's a bit much for the stock 5.8kg one?

I'm sure it sounds good. I was just wondering about comparisons. An anecdote about a Victor engineer is interesting, but.....
Regards,

My impression from touring Tokyo audio salons is that the GT2000 is much more commonly seen for sale these days than are some of the other TOTL vintage direct-drive turntables. This can only mean that many more of them were sold vs for example the SP10 Mk3 or the Exclusive P3/P3a. However, I have seen a GT2000X only in those photos on Vintage Knob, never saw one in "real life". Thus I missed the point that the GT2000X has the heavy platter; I thought it was distinguished only by its more massive plinth. All of that said, I have never heard either Yamaha. One criticism I read was of the tonearm. It is apparently made at least in part of plastic, probably some high-tech plastic but plastic, nevertheless. There was an article detailing the fact that those tonearms can develop stress fractures (maybe on Vintage Knob???). I don't know if this applies to all tonearms supplied with the GT2000 and GT2000X or only a particular one.

Does anyone here own a GT2000/X? How about a Luxman or Onkyo TOTL direct-drive? Those last two seem really rare to find these days.

I have the GT2000 and am quite happy with it, though I have not done direct comparisons with other DD turntables.

The difference between the GT2000 & GT2000X is that the latter has a bigger motor shaft and plinth. The have the same platter, motor, and controller. The 18kg gunmetal platter was optional for both.

Some people like the arm on the GT2000 but many also change it for something else. Yamaha sold two other arms and SAEC made a special version of 407, the 407/GT that can directly replace the existing arm. There are also commercial arm boards available that allow the use of other tonearms. I have no experience with or knowledge of fractures in the tonearm.

Thanks, Sampsa. Have you compared your GT2000 to any other vintage DD turntables? Have you ever seen either the 18kg platter (hard to believe) or a GT2000X?