Turntable speed accuracy

One more thing. I realized whilst taking my evening stroll that I had misrepresented the Lenco. I alone have set up mine so that the speed adjustment is so tedious. On a stock Lenco, there is an external lever that allows you to select 16, 33, 45m or 78 rpm without ever removing the platter, once you have manually set the idler wheel in relation to the motor shaft. So, possibly the guy who told you that the speed was not spot on was using a stock Lenco L75 and was not hip to the fact that a small speed error can be easily corrected with a little DIY effort. I believed that firmly and permanently anchoring the distal end of the idler arm was preferable to using the external adjustment mechanism, wherein the pivot of the idler arm rides on a rail across the motor drive shaft, as you select speed.

Lewm: " I believed that firmly and permanently anchoring the distal end of the idler arm was preferable to using the external adjustment mechanism, wherein the pivot of the idler arm rides on a rail across the motor drive shaft, as you select speed."

I agree. All Lenco tables in stock form have speed issue. Not the fault of the motor, idler wheeel, nor the design. It is in the sliding mechanism that holds the idler arm that is always loose. You can hold it and feel it with your fingers and it's loose and it is this looseness in holding down the idler arm that's preventing the speed to be spot on. You can lock it down of course but then you lose the speed adjustability, hence the PTP approach but adjusting speed would be, indeed, a pain in the arse. Only by keep the opposite end of the idler wheel solidly in place will the speed be stable. It's a very mechanical turntable and if the idler wheel is allowed to move even microscopically on the tapered pulley the speed will change. I have several stock Lencos and they all have the same issue. It's no wonder some diyers made a micrometer to slide the idler arm in keeping in position and having the adjustment ability.

Part number 14 is the culprit.

_______

Hiho, thats crazy and thanks for sharing. That's exactly what I enjoy about these forumns sharing such, I'm always open minded, learning something new and find tables alone there is allot to learn.

Dev, I hope I did not discourage you to pursue the Lenco. It's a great sounding turntable although I never had the time nor effort to set it up properly but I have friends who got good results from adding a little elbow grease.

For an idler design, it is very quiet, thanks to the brilliant simplicity, its quality core components: motor, bearing, and platter. Its idler wheel is also the thinnest and lightest among idler-drive designs and that might partly contribute to its silent running. The idler wheel is also quite stiff and low compliant compare to Garrard, Thorens, Rek-o-kut, etc... and consequently, I believe, less "meaty" sounding, which can be a plus to some people. Admittedly, I quite like that beefy tone on idler tables with thick fat wheels but they are also harder to tame the noise, especially if they use a huge fast running motor, eg, that monstrous Ashland motor in the ROK or McCurdy or Russco. To me the Garrard definitely has a juicier tone than the Lenco but it's not as quiet. Lenco is also, I believe, easier to obtain correct stable speed. My experience is that the thickness, compliance, and among of rubber of the wheel correlate with the tone and tonal balance. (Let's not get into the audio political correctness of neutral game, "my table is more Neutral than your table" pissing contest. I cringed whenever audio reviewer using that term. I equate "neutral" with neutered.) I still marvel at the enormous bass dynamic and heft of a McCurdy idler table with a huge motor...but, alas, it was really noisy--good luck taming that beast!

Anyway, if the noise issue is taken care of, idler tables are great musical machines and can get quite addictive with its ballsy tone... other tables (like some Scottish sacred cow) might sound wimpy as the musicians are playing with one testicle missing. If the table pass the Timeline test, would that be balls to wall? :-)

Sigh, so many toys so little time...

_____

Hiho, FWIW, I use a 2nd generation PTP. As you know, it has provision for sliding the idler wheel without removing the platter; one is supposed to leave the two bolts under the platter slightly loose and tighten down only the one that is visible and accessible with the platter in place. That way, you can slide the idler by loosening only the one accessible bolt. However, I am not following that directive. I thought I was better off to get the speed as close to perfect as possible, with all bolts loose, and then to tighten down all 3 of them very firmly. From then on, I make fine adjustments to speed via the Walker Motor Controller. As you know also, the next mod was to remove the rubber bushing at the anchor point of the idler arm, so as to disallow even that small amount of play at its pivot. I have not done that, in the belief that there is some benefit to dissipating vibrational energy in the idler arm itself, by letting the arm "rattle" a little bit, so energy is not reflected back into the idler and thence into the platter. It's all a head game, because I have no data either way. I do like what I've got, however.