Phantom 2 arm using SME vs Graham mount

Unlike the earlier Graham 1.5 arm (which had an adjustable micrometer sliding arrangement on its SME base), Grahams SME base for the Phantom II is a solid plate with the SME footprint. The arm-post locking arrangement looks the same for both Graham/SME mounts. So the difference is really the shape of the mounting plate and the fact that Graham's SME base has elongated fixing holes providing some (more) adjustment to set correct pivot/spindle distance.

While I don't want to pre-empt anyone who has actually done the comparison - I predict any audible difference would be slight to non-existant.

I would suggest that if you have a SME cutout get the SME plate, otherwise get the Graham.

There won't be many out there who tried that. All I can say, I did it years ago with Graham 2.2 series (The Basis/Graham Dealer had a Basis Armboard for it, I had the Graham mount at that time at the Basis Debut). I was not able to hear a difference at that time.

Thanks Tobes and Syntax. I brought this up because I had previously read someone's Audiogon comments claiming he heard both mounts and felt the Graham sounded better than the SME in several areas. In correspondence with Jeff Catalano at Highwater, he indicated no significant differences. I'm ready to go with the Raven One 'table and either the Phantom 2 Supreme or TW Acustic 10.5 arm. At the moment, I own the SME IV.Vi.