2. analog
  3. 1332569101

No sound coming from spekaers - turntable?

Okay, if you've seen my previous question, I'm aware I sound like an idiot here, but I figured the belt thing out. apparently I had to leave it on the platter and not the turntable itself.

Anyway, I've come across another problem. The platter spins, I can hear the cartridge tracking the record, all cartridge wires are connected and in the correct spots, I've set the tracking force/alignment to an approximately accurate value (without the help of a gauge, which might have been the source of the problem, but I doubt it).

All cables from the turntable to the amp (which is a NAD C315BEE integrated amp) are connected.

All cables from the amp to the speakers (Wharfedale Diamond 10.1). Unless I'm missing something and the speakers have a hidden power button, everything is fine.

Except...no sound is coming out of the speakers. None at all. I can hear the tracking sound coming from the turntable itself, but nothing else.

Help?
toxicwaterfront
sounds_real_audio
1,009 posts
 
Make sure your speakers are plugged in.
toxicwaterfront OP
41 posts
 
They are.
toxicwaterfront OP
41 posts
 
fixed. The light was on 'tuner' instead of 'aux.' everything's working properly now, and it sounds amazing :D
Ag insider logo xs@2x
drrsutliff
858 posts
 
I do not believe your NAD integrated has a phono input. If this is the case you will need an external phono preamp. What cartridge are you using? Different types of cartridges will have different requirements for the phono preamp. The cartridge output, even from MM cartridges which are usually the highest at approximately 5 millivolts, will not work on most preamp or integrated amp inputs that are designed for 1 to 2 volts.
manitunc
795 posts
 
Do you have a mute button or tape monitor button. If so, push it.
More to discover