Calling all owners - Jasmine LP 2.0 MKII


I've got about 4 full day's use on mine but do not like what I hear.

Question: How dramatically does this phono preamp change throughout break-in?

I hear distortion (spittiness and splashy bass as if it is running out of power) and a flat soundstage.

I am using the stock power cord and umbilical.

I compared it to my other three phono preamps - Hagerman Bugle, V-LPS, Biotronics Control Systems Gestalt (outstanding and extremely rare). They all are much clearer and cleaner.

It must be mentioned that I requested the Ebay seller to provide a reduction in global gain since I have loads of it with my Project Sunrise II headphone amp. They added a switch on the rear that cuts gain by about 5 dB.
roth_s
@Sbrownnw and others wishing to dim the bright logos - I found a much better way.

Print out a rectangle of black you create with Excel, MS Paint, whatever just to get a printout of black sized 1" x 2 1/2".

Open the case bottom plate, remove the face plate and use office tape to fasten the black paper you created WHITE SIDE FACE OUT so you see the white side once assembled.

I suggest you print out two or three pieces in various shades of black/gray and try out each in a dark room to get what you like.
Well I have the new LP 2.0MKII just got it last week out of China.
Been running it day and night for a week now with the new upgraded silver umbilical cord made by Jasmine, and a well broken in upgraded power cord.I still hear the extra brightness in the highs because the caps are breaking in. when does this stop? No one answered the question, how long is the break in peroid? How much does the sound change from the start of the breakin peroid. When I recapped my pre it took about a 5 weeks. At this point my old basic Lehman black cube was just as good except smoother in the highs
Next how many of you have replaced the coupling caps with the Jantzen superior z caps
I replaced my output caps with the Jantzen Superior z-caps on my Jasmine. I don't recall any brightness. Rather, it was like lifting a veil that resulted in greater clarity and life. I use a Denon DL-S1.

Have you checked the VTA on your tonearm? I use a magnifying glass and observe the angle of the stylus in the record groove and strive for 90 degrees. Then, I move the arm up or down for the best sound. I also lean towards the highest tracking force so the stylus properly tracks the grooves instead of skimming past the tiny undulations. When I lose dynamics, I know it is too heavy.
well I use a Shelter 501 mk II with a origin live silver tone arm on a nice origin live Calypso tt on a Ginkgo cloud. and yes after 40 years I got the vta thing figured out. Man the cloud made more difference then the Jasmine has so far. So I am to believe from your comments this phono sings right out of the box and no break in time is required? the phono's sound does not improve much after a certain period of time break in time? just replace the coupling caps to improve the sound?
Oh! ok Thanks,
Audiogabby
The sound will change dramatically with time. I left mine on for over two months straight after purchase. After more than 50 hrs of playing time, I noticed a huge difference
cool well thats what I was thinking (hoping,praying lol)
I will let you all know my thoughts in about 2 months. Then I will compare the Jasmine to the Lehman black cube.
after that get some superior z's crossing my fingers peace out, Ron