2. analog
  3. 1336491953

Aesthetix IO Eclipse

Hi,

I'm seriously considering this Phono preamp (with the additional line input and volume control), and would like to get in contact with potenial owners of the IO-series from Aesthetix. I believe the IO is what I'm looking for sonically (and I love the design and user experience). But, I'm slightly concerned about earlier reports of noise/hum issues, as well as riability and the practical side of things related to tube life and generated heat.

So....

- Is the IO Eclipse (still) up there among the best on the market?
- Will the possibility of driving a poweramp directly offer any disadvantages, or be as good as or better than a separate preamp of the same caliber?
- Are the tubes worth the expense, effort and potential hassle...?

What I'm looking for is a high degree of naturalness, musicality and flow combined with great dynamics and a large, holographic soundstage.

My system:

Brinkmann Bardo + 10.5 tonearm + Pi-pickup (Analog)
Audio Aero La Fontaine (CD/DAC/Pre)
Karan KA M2000 (Monoblocks)
Sonus Faber Futura (Speakers)
Kubala Sosna Elation (Cables)

Thanks!
128x128sidekick_i
lula
213 posts
 
Has anyone compared the IO to the Rhea Sig? The latter, from my readings, hasn't had any noise problems and is a single chassis unit with great conveniences. Of course the actual sonics are what ultimately counts.
rushton's avatar
rushton
2,445 posts
 
The Rhea Signature is very good. The Io Signature is materially better. I'd also prefer the standard Io over the Rhea Signature, particularly knowing that I can update it at any time.

Please don't misunderstand the noise point.

The Io is VERY quiet. There are NO "noise issues." It is simply a question of 80+ db of gain coming entirely from tubes. If you run the Io "flat out," there will some tube rush as compared to a solid state or transformer based gain stage device. At reasonable listening volumes and with reasonable output cartridges (e.g., 0.24mv and above), the Io Signature or Eclipse will be very quiet and one of the very best phono stages available.
.
tobes's avatar
tobes
436 posts
 
Hi Rushton, while I'm not in the immediate market for an Io, I've had a peruse of the owners manual and was surprised by the unusually long warm-up before use. Specifically, I'm referring to these instructions:
A. Turn power on.
B. Wait at least fifteen minutes for power supplies to fully stabilize before unmuting preamp.
C. Begin playing record.

I'm used to tube phono and preamps muting for 30-45s after power-up - but 15min(?) seems a bit excessive/inconvenient. What have you found?
rushton's avatar
rushton
2,445 posts
 
Tobes, I haven't seen these instructions. I've always just followed the lighting of the diodes on the face of the power supplies as my guide. But, from experience, if the power supplies are not fully stabilized, you can get some wonky sounds. For my system, I'm generally doing a 10-15 minute warm-up in any event for everything to stabilize (tube phono, tube monoblock amps, air bearing TT).
.
rushton's avatar
rushton
2,445 posts
 
Aesthetix
‎"The best phono stage we have ever heard"...on newsstands now, Io Eclipse wins 5 Stars from What Hi-Fi? Sound & Vision magazine in the UK - What an honor, thank you! http://www.whathifi.com/themag/07-2012
More to discover